期刊文献+
任意字段
题名或关键词
题名
关键词
摘要
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息
共找到61篇文章
< 1 2 … 4 >
每页显示 20 50 100
已选0条
引用分析
参考文献
引证文献
 统计分析
检索结果
已选文献
显示方式：
Effects of multi-directional forging combined with hot rolling on microstructure and mechanical properties of 7050 aluminum alloy 认领 引用
1
作者 Xiao-fen TAN Hao-wei HUANG +3 位作者 Ze-kun LIAO Wen-bin ZHANG Xiao-peng LIANG Hui-zhong LI 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2026年第7期1988-2004,共17页
Multi-directional forging at 450°C combined with rolling at 300°C and 470°C was applied to a 7050 aluminum alloy prior to heat treatment.The effects of rolling temperature on the microstructure of the a... Multi-directional forging at 450°C combined with rolling at 300°C and 470°C was applied to a 7050 aluminum alloy prior to heat treatment.The effects of rolling temperature on the microstructure of the alloy were analyzed using optical microscopy,X-ray diffraction,scanning electron microscopy,electron backscatter diffraction and transmission electron microscopy.After solution treatment,the average grain size of the alloy measured from high-angle grain boundaries was approximately 20μm,compared to 100μm before forging.After artificial aging,the yield strength,ultimate tensile strength and elongation after fracture of the samples rolled at 300°C were(609.9±5.5)MPa,(662.4±1.7)MPa and(18.5±1.2)%,respectively.In the case where the alloy was rolled at 470°C,the corresponding values were(592.7±4.2)MPa,(641.0±3.9)MPa and(18.7±0.9)%,respectively. 展开更多
关键词 7050 aluminum alloy multi-directional forging rolling microstructure mechanical properties
暂未订购 下载PDF
Designing Optimal Temperature for Multi-directional Forging Process:A Phase-Field Crystal Study 认领 引用
2
作者 Song Zhuo Li Huanqing +3 位作者 Tian Xiaolin Kang Xiaolan Hou Hua Zhao Yuhong 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2026年第5期1146-1156,共11页
Using multi-directional forging temperature as the independent variable and adopting the dual-mode phase field crystal model,the nucleation modes,reaction mechanisms,and interactions between grain boundaries and dislo... Using multi-directional forging temperature as the independent variable and adopting the dual-mode phase field crystal model,the nucleation modes,reaction mechanisms,and interactions between grain boundaries and dislocations at different temperatures were investigated.Results show that a mapping relationship between process parameters and grain refinement/coarsening is established,and the optimal processing temperature coefficient is 0.23.Compared with the cases with processing temperature coefficient of 0.19,0.20,0.21,0.25,and 0.27,the refinement effect increases by 256.0%,146.0%,113.0%,6.7%,and 52.4%,respectively.Excessively high temperatures lead to grain coarsening due to dislocation annihilation,and the application of strain can reduce the actual melting point of materials.Even if the processing temperature does not exceed the theoretical melting point,remelting and crystallization may still occur,resulting in an overburning phenomenon that reduces internal defects and increases overall grain size.This research is of great significance for the actual forging process design. 展开更多
关键词 phase-field crystal method multi-directional forging temperature grain refinement dislocation
暂未订购 下载PDF
A nonlinear damping absorber for broadband and multi-directional vibration suppression 认领 引用
3
作者 Haiting ZHENG Hu DING J.C.JI 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI CSCD 2026年第6期1301-1322,共22页
Most existing vibration absorbers are limited by the need for precise tuning,and are difficult to suppress broadband vibration.A nonlinear damping absorber(NDA)is proposed in this paper to control the vibrations of st... Most existing vibration absorbers are limited by the need for precise tuning,and are difficult to suppress broadband vibration.A nonlinear damping absorber(NDA)is proposed in this paper to control the vibrations of structures in multiple modes,providing nonlinear damping in multiple directions and enabling broadband and multi-directional vibration suppression.A pipe is selected as the research object to analyze its dynamic behaviors and vibration suppression mechanisms.The vibration reduction performance of the NDA on the in-plane vibration and out-of-plane vibration of the pipe is studied through experimentation and theory.First,the configuration of the NDA is designed,and its mechanical model is established.An experimental platform is built for the parameter identification and multi-directional vibration reduction test of the absorber.Second,based on the generalized Hamilton's principle,the mechanical model describing the in-plane vibration and out-of-plane vibration of the pipe with the NDAs is derived.The approximate solution of the nonlinear response is derived and numerically validated.The multi-directional and multi-modal vibration reduction efficiency of the NDAs for the structures is analyzed.The research results show that the proposed absorber can significantly control the multi-directional vibration.Nonlinear damping effectively broadens the vibration reduction bandwidth,and improves the damping efficiency,with the cubic term playing the dominant role.Finally,a concept of multi-modal weighted optimization is proposed.The absorber parameters are optimized through the particle swarm optimization(PSO)algorithm.This paper provides a new type of absorbers for the vibration control of multiple directions in broadband. 展开更多
关键词 absorber nonlinear damping multi-directional vibration vibration control
暂未订购 下载PDF
Research on the stress corrosion cracking behavior of ZK60 magnesium alloy enhanced by multi-directional compression process 认领 引用
4
作者 Xinyue Liang Jiaqi Hu Hong Gao 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2026年第2期368-386,共19页
The poor corrosion resistance and high susceptibility to stress corrosion cracking(SCC)of magnesium alloys limit their potential in biodegradable implant applications.This study systematically investigates the corrosi... The poor corrosion resistance and high susceptibility to stress corrosion cracking(SCC)of magnesium alloys limit their potential in biodegradable implant applications.This study systematically investigates the corrosion behavior and SCC resistance of ZK60 magnesium alloy processed by multi-directional compression(MDC).A combination of electrochemical measurements,slow strain rate tensile(SSRT)testing,and advanced microstructural characterization was employed to evaluate the material’s performance in phosphate buffer solution(PBS).The results demonstrate that MDC processing significantly refines the grain structure from 19.69μm(T4)to 7.89μm(12MDC),simultaneously increasing dislocation density and fragmenting second-phase particles.These microstructural modifications shift the corrosion mechanism from localized pitting to uniform corrosion,reducing the electrochemical corrosion rate by 42.8%and the hydrogen evolution corrosion rate by 88.6%in the 12MDC sample.Furthermore,theε-and UTS-related SCC susceptibility indices are reduced by 14.7%(12MDC)and 17.5%(6MDC),respectively,compared with the T4 sample,which is attributed to the dense twin/grain boundary networks that deflect cracks and dissipate fracture energy.The synergistic effects of grain refinement,dislocation strengthening,and Orowan mechanism collectively enhance both mechanical properties and corrosion resistance.This work confirms that MDC processing effectively improves the functional reliability of ZK60 alloy for biomedical applications through microstructural optimization. 展开更多
关键词 Stress corrosion cracking Multi-directional compression Strengthening mechanism Magnesium alloy
暂未订购 下载PDF
Superplasticity of fine-grained Mg−Gd−Y−Zn−Zr alloy prepared via multi-directional forging 认领 引用
5
作者 Jing-qi ZHAO Ze-zheng WANG +3 位作者 Chun KE Qiang MENG Chun-xiang ZHANG Jun-ting LUO 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2025年第8期2553-2571,共19页
The superplasticity of the Mg−8.59Gd−3.85Y−1.14Zn−0.49Zr alloy was investigated before and after multi-directional forging(MDF)and the mechanisms affecting superplastic deformation were analyzed.The results indicate t... The superplasticity of the Mg−8.59Gd−3.85Y−1.14Zn−0.49Zr alloy was investigated before and after multi-directional forging(MDF)and the mechanisms affecting superplastic deformation were analyzed.The results indicate that after MDF at a temperature of 350℃and strain rates of 0.1 and 0.01 s−1(1-MDFed and 2-MDFed),the superplasticity of the alloy can be significantly improved.The elongations of the MDFed alloys exceed 400%under the strain rate of 6.06×10−4s−1and temperatures of 350,375,and 400℃,and reach the maximum values of 766%(1-MDFed)and 693%(2-MDFed)at 375℃.The grain boundary sliding of the MDFed alloy is sufficient,and the energy barrier of deformation decreases.Theβphase limits the grain growth and promotes dynamic recrystallization,maintaining the stability of the fine-grained structure during superplastic deformation.Several Y-rich phases nucleate in the high-strain region(i.e.,the final fracture region)at high temperatures,accelerating the fracture of the specimen. 展开更多
关键词 Mg−Gd−Y−Zn−Zr superplasticity multi-directional forging fracture morphology Y-rich phase
暂未订购 下载PDF
Coarse grain non-uniform refinement simulation in multi-directional forging of titanium alloys based on macro-deformation and crystal plasticity modelling 认领 引用
6
作者 Shiqi Guo Liang Huang +1 位作者 Kezhuo Liu Changmin Li 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2025年第34期128-144,共17页
The complex grain fragmentation mechanisms of coarse grains in titanium alloys under multi-directional forging(MDF)directly influence the optimization and control of primary hot working processes.This study conducted ... The complex grain fragmentation mechanisms of coarse grains in titanium alloys under multi-directional forging(MDF)directly influence the optimization and control of primary hot working processes.This study conducted MDF experiments onβ-phase as-cast Ti-6554 alloy and simulated non-uniform deformation during cyclic multi-directional compression through macro-and micro-deformation modeling.The results revealed that friction and surface cooling caused low strain and tensile stress concentration at billet edges,leading to mixed grain structures.In contrast,high strain and triaxial compressive stress at billet centers facilitated uniform grain refinement.After 14 compressions and 4 intermediate reheating processes,coarse grains of the billet were refined from 2-5 mm to 0.25-0.50 mm,achieving uniform grain sizes across different regions.For the first time,the orientation evolution of grains with different morphologies during multi-directional compressions was visualized microscopically.Columnar grains were found to be more easily subdivided than equiaxed grains due to local strain accumulation.Under cumulative compressions,grain orientations gradually rotated from uniform to random,driving continuous dynamic recrystallization(CDRX).Slip system interactions and concentrated misorientation led to the formation and extension of transition and shear bands,inducing grain fragmentation dominated by transgranular subdivided CDRX.Smooth grain boundaries transformed into serrated ones after multiple passes,providing additional nucleation sites for discontinuous dynamic recrystallization(DDRX)and facilitating boundary expand CDRX.The interaction of diverse DRX mechanisms was the fundamental cause of grain refinement.This study clarified the principles of refining and homogenizing millimeter-grade coarse grains under increasing forging strain,offering valuable insights for the development of primary hot processing techniques for as-castβtitanium alloys. 展开更多
关键词 Titanium alloy Multi-directional forging Coarse grain refinement Crystal plasticity modeling Grain orientation evolution
暂未订购 下载PDF
Microstructure evolution and mechanical properties of Mg−Gd−Zn alloy with and without LPSO phase processed by multi-directional forging 认领 引用 被引量：4
7
作者 Jing-yi HUANG Yao-ling LIU +3 位作者 Yu-xiang HAN Ying-chun WAN Chu-ming LIU Zhi-yong CHEN 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2025年第4期1075-1091,共17页
The homogenized Mg−5.6Gd−0.8Zn(wt.%)alloys were treated with water cooling and furnace cooling to obtain specimens without and with the 14H long-period stacking ordered(LPSO)phase.Subsequently,multi-directional forgin... The homogenized Mg−5.6Gd−0.8Zn(wt.%)alloys were treated with water cooling and furnace cooling to obtain specimens without and with the 14H long-period stacking ordered(LPSO)phase.Subsequently,multi-directional forging(MDF)experiments were carried out.The microstructure and mechanical properties of different regions(the center,middle and edge regions)in the MDFed alloys were systematically investigated,and the effect of LPSO phase on them was discussed.The results show that the alloys in different regions undergo significant grain refinement during the MDF process.Inhomogeneous microstructures with different degrees of dynamic recrystallization(DRX)are formed,resulting in microhardness heterogeneity.The alloy with the LPSO phase has higher microstructure homogeneity,a higher degree of recrystallization,and better comprehensive mechanical properties than the alloy without the LPSO phase.The furnace-cooled alloy after 18 passes of MDF has the best comprehensive mechanical properties,with an ultimate compressive strength of 488 MPa,yield strength of 258 MPa,and fracture strain of 21.2%.DRX behavior is closely related to the LPSO phase and deformation temperature.The kinked LPSO phase can act as a potential nucleation site for DRX grains,while the fragmented LPSO phase promotes DRX nucleation through the particle-stimulated nucleation mechanism. 展开更多
关键词 Mg−Gd−Zn alloy multi-directional forging LPSO phase twinning kink dynamic recrystallization
暂未订购 下载PDF
Advanced Computational Modeling and Mechanical Behavior Analysis of Multi-Directional Functionally Graded Nanostructures:A Comprehensive Review 认领 引用
8
作者 Akash Kumar Gartia S.Chakraverty 《Computer Modeling in Engineering & Sciences》 SCIE EI 2025年第3期2405-2455,共51页
This review explores multi-directional functionally graded(MDFG)nanostructures,focusing on their material characteristics,modeling approaches,and mechanical behavior.It starts by classifying different types of functio... This review explores multi-directional functionally graded(MDFG)nanostructures,focusing on their material characteristics,modeling approaches,and mechanical behavior.It starts by classifying different types of functionally graded(FG)materials such as conventional,axial,bi-directional,and tri-directional,and the material distribution models like power-law,exponential,trigonometric,polynomial functions,etc.It also discusses the application of advanced size-dependent theories like Eringen’s nonlocal elasticity,nonlocal strain gradient,modified couple stress,and consistent couple stress theories,which are essential to predict the behavior of structures at small scales.The review covers the mechanical analysis of MDFG nanostructures in nanobeams,nanopipes,nanoplates,and nanoshells and their dynamic and static responses under different loading conditions.The effect of multi-directional material gradation on stiffness,stability and vibration is discussed.Moreover,the review highlights the need for more advanced analytical,semi-analytical,and numerical methods to solve the complex vibration problems ofMDFG nanostructures.It is evident that the continued development of these methods is crucial for the design,optimization,and real-world application of MDFG nanostructures in advanced engineering fields like aerospace,biomedicine,and microanoelectromechanical systems(MEMS/NEMS).This study is a reference for researchers and engineers working in the domain of MDFG nanostructures. 展开更多
关键词 Functionally graded multi-directional nano size-dependent vibration
暂未订购 下载PDF
Structure uniformity and limits of grain refinement of high purity aluminum during multi-directional forging process at room temperature 认领 引用 被引量：17
9
作者 朱庆丰 李磊 +3 位作者 班春燕 赵志浩 左玉波 崔建忠 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2014年第5期1301-1306,共6页
The effect of forging passes on the refinement of high purity aluminum during multi-forging was investigated. The attention was focused on the structure uniformity due to deformation uniformity and the grain refinemen... The effect of forging passes on the refinement of high purity aluminum during multi-forging was investigated. The attention was focused on the structure uniformity due to deformation uniformity and the grain refinement limitation with very high strains. The results show that the fine grain zone in the center of sample expands gradually with the increase of forging passes. When the forging passes reach 6, an X-shape fine grain zone is initially formed. With a further increase of the passes, this X-shape zone tends to spread the whole sample. Limitation in the structural refinement is observed with increasing strains during multi-forging process at the room temperature. The grains size in the center is refined to a certain size （110 μm as forging passes reach 12, and there is no further grain refinement in the center with increasing the forging passes to 24. However, the size of the coarse grains near the surface is continuously decreased with increasing the forging passes to 24. 展开更多
关键词 multi-directional forging high purity aluminum structure uniformity grain refinement
暂未订购 下载PDF
Simultaneously Enhanced Mechanical Properties and Damping Capacities of ZK60 Mg Alloys Processed by Multi-Directional Forging 认领 引用 被引量：7
10
作者 L.B.Tong J.H.Chu +4 位作者 D.N.Zou Q.Sun S.Kamado H.G.Brokmeier M.Y.Zheng 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2021年第2期265-277,共13页
In this study,the mechanical properties and damping capacities of cast Mg-5.5 Zn-0.6 Zr(weight percent,ZK60)alloys have been simultaneously improved by a facile multi-directional forging(MDF)processing,and the mechani... In this study,the mechanical properties and damping capacities of cast Mg-5.5 Zn-0.6 Zr(weight percent,ZK60)alloys have been simultaneously improved by a facile multi-directional forging(MDF)processing,and the mechanisms of microstructure evolution and texture modification are systematically investigated.The activation of tension twinning occurs during the initial MDF stage,due to the coarse-grained structure of the as-cast alloy.With increasing MDF passes,the continuous dynamic recrystallization(CDRX)results in a fine equiaxed-grain structure.The typical non-basal texture is formed in the as-MDFed alloy for 6 passes,with the(0001)planes inclined 60°–70°to forged direction and 10°–20°to transverse direction,respectively.A good balance between the strength(~194.9 MPa)and ductility(~24.9%)has been achieved,which can be ascribed to the grain refinement,non-basal texture and fine precipitate particles.The damping capacity is remarkably improved after MDF processing,because the severe deformation increases the dislocation density,which effectively enlarges the sweep areas of mobile dislocations. 展开更多
关键词 Mg alloy Multi-directional forging Microstructure Texture evolution Mechanical properties Damping capacity
暂未订购 下载PDF
Design,Characterization and Optimization of Multi-directional Bending Pneumatic Artificial Muscles 认领 引用 被引量：6
11
作者 Wei Xiao Dean Hu +2 位作者 Weixiong Chen Gang Yang Xu Han 《Journal of Bionic Engineering》 SCIE EI CSCD 2021年第6期1358-1368,共11页
Bending Pneumatic Artificial Muscles(PAMs)are particularly attractive and extensively applied to the soft grasper,snake-like robot,etc.To extend the application of PAMs,we fabricate a Multi-directional Bending Pneumat... Bending Pneumatic Artificial Muscles(PAMs)are particularly attractive and extensively applied to the soft grasper,snake-like robot,etc.To extend the application of PAMs,we fabricate a Multi-directional Bending Pneumatic Artificial Muscle(MBPAM)that can bend in eight directions by changing the pressurized chambers.The maximum bending angle and output force are 151°and 0.643 N under the pressure of 100 kPa,respectively.Additionally,the Finite Element Model(FEM)is established to further investigate the performance.The experimental and numerical results demonstrate the nonlinear relationship between the pressure and the bending angle and output force.Moreover,the effects of parameters on the performance are studied with the validated FEM.The results reveal that the amplitude of waves and the thickness of the base layer can be optimized.Thus,multi-objective optimization is performed to improve the bending performance of the MBPAM.The optimization results indicate that the output force can be increased by 7.8%with the identical bending angle of the initial design,while the bending angle can be improved by 8.6%with the same output force.Finally,the grasp tests demonstrate the grip capability of the soft four-finger gripper and display the application prospect of the MBPAM in soft robots. 展开更多
关键词 Pneumatic artificial muscle Multi-directional bending Soft robots Parameter optimization
Investigation of dry sliding wear properties of multi-directional forged Mg-Zn alloys 认领 引用 被引量：6
12
作者 S.Ramesh Gajanan Anne +2 位作者 H.Shivananda Nayaka Sandeep Sahu M.R.Ramesh 《Journal of Magnesium and Alloys》 SCIE EI CAS 2019年第3期444-455,共12页
Effect of multi-directional forging(MDF)on wear properties of Mg-Zn alloys(with 2,4,and 6wt%Zn)is investigated.Dry sliding wear test was performed using pin on disk machine on MDF processed and homogenized samples.Wea... Effect of multi-directional forging(MDF)on wear properties of Mg-Zn alloys(with 2,4,and 6wt%Zn)is investigated.Dry sliding wear test was performed using pin on disk machine on MDF processed and homogenized samples.Wear behavior of samples was analyzed at loads of ION and 20 N,with sliding distances of 2000m and 4000m,at a sliding velocity of 3m/s.Microstructures of worn samples were observed under scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),and x-ray diffraction(XRD)and the results were analyzed.Mechanical properties were evaluated using microhardness test.After 5 passes of MDF,the average grain size was found to be 30±4p m,22±3 pm,and 18±3 pm,in Mg-2%Zn,Mg-4%Zn,and Mg-6%Zn alloys,respectively,with significant improvement in hardness in all cases.Wear resistance was improved after MDF processing,as well as,with increment in Zn content in Mg alloy.However,it decreased when the load and the sliding distance increased.Worn surface exhibited ploughing,delamination,plastic deformation,and wear debris along sliding direction,and abrasive wear was found to be the main mechanism. 展开更多
关键词 Multi-directional forging Mg-Zn alloy Microhardness Wear Coefficient of friction
暂未订购 下载PDF
Ductility enhancement of EW75 alloy by multi-directional forging 认领 引用 被引量：8
13
作者 M.Hong D.Wu +1 位作者 R.S.Chen X.H.Du 《Journal of Magnesium and Alloys》 CAS 2014年第4期317-324,共8页
In this study,the Mg-7Gd-5Y-1Nd-0.5Zr alloy can reach a high ductility by the process of multi-directional forging,and the evolution of the microstructure,texture and the mechanical properties were discussed systemati... In this study,the Mg-7Gd-5Y-1Nd-0.5Zr alloy can reach a high ductility by the process of multi-directional forging,and the evolution of the microstructure,texture and the mechanical properties were discussed systematically.The results show that after the solutionized sample was multi-forged at 500℃,its grain size can be refined from 292 um to 58 um.As the forging temperature decreased,fine particles precipitated in the matrix.The volume fraction of the particles increased with the forging temperature decreasing,so the nucleation and growth of crystallization were strongly restricted.There was no recrystallization as the forging temperature fell to 410℃,and the severe deformed grains distributed as streamlines perpendicular to the final compression axis.The texture intensity decreased with increasing forging passes.The sample with best ductility was obtained after compressed at 470℃,with an elongation to failure of 21%at room temperature,which is increased by 200%,in comparison with that of the samples in solutionized condition.EBSD results revealed that the mean grain size was 15 um.Refined grains as well as the weakened texture were the key factors to its high ductility. 展开更多
关键词 Mg alloys Ductility Multi-directional forging DRX Precipitates
暂未订购 下载PDF
Tribological Characterization of Commercial Pure Titanium Processed by Multi-Directional Forging 认领 引用 被引量：3
14
作者 I. Ansarian M. H. Shaeri +1 位作者 M. Ebrahimi P. Minarik 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2019年第7期857-868,共12页
This work discusses tribological properties of commercial pure (CP) titanium processed by multi-directional forging (MDF) up to six passes at room temperature and 220 ℃. For this purpose, wear test was conducted by d... This work discusses tribological properties of commercial pure (CP) titanium processed by multi-directional forging (MDF) up to six passes at room temperature and 220 ℃. For this purpose, wear test was conducted by dry sliding pin-on-disk method on the initial and ultrafine grained samples using different stress magnitudes of 1, 1.5 and 2 MPa. The results showed that wear resistance of CP titanium increases after the first pass of MDF in comparison with the initial condition, irrespective of the applied normal stress. For example, the average wear rate of MDFed samples was decreased about 30% and 24%, after first pass at room temperature and 220 ℃, respectively. However, average wear rate of the samples processed by six MDF passes was reduced about 40% at lower normal loads;it was increased about 9% at higher ones as compared to the initial condition. It was also found that the dominated wear mechanisms were abrasive and delaminated at the lower stresses, while the delamination mechanism was intensified and a slight adhesion was observed during the higher applied normal loads. 展开更多
关键词 Multi-directional forging Commercial pure titanium Tribological behavior Wear mechanisms
暂未订购 下载PDF
Multi-Directional and Multiphase Tectonic Modification,and Hydrocarbon Differential Enrichment in the Middle-Upper Yangtze Region 认领 引用 被引量：3
15
作者 Zhiliang He Shuangjian Li +1 位作者 Yingqiang Li Jian Gao 《Journal of Earth Science》 SCIE CAS CSCD 2022年第5期1246-1259,共14页
Based on the analysis of the deformation styles in different tectonic belts of the MiddleUpper Yangtze region,as well as the dissection of typical hydrocarbon reservoirs,this study determined the controlling effects o... Based on the analysis of the deformation styles in different tectonic belts of the MiddleUpper Yangtze region,as well as the dissection of typical hydrocarbon reservoirs,this study determined the controlling effects of deformations on the hydrocarbon accumulations,obtaining the following results.The Middle-Upper Yangtze region experienced significant deformations during the Late Indosinian(T2–T3),the Middle Yanshanian(J3–K1),and the Himalayan,and five styles of tectonic deformations mainly occurred,namely superimposed deep burial,uplift,compressional thrusting,multi-layer decollement,and secondary deep burial.The distribution of hydrocarbon reservoirs in the piedmont thrust belts is controlled by the concealed structures on the footwall of the deep nappe.The gentle deformation area in central Sichuan experienced differential uplift,structural-lithologic hydrocarbon reservoirs were formed over a wide area.The eastern Sichuan-western Hunan and Hubei deformation area experienced Jura Mountains-type multi-layer detachment,compressional thrusting,and uplift.In relatively weakly folded and uplifted areas,conventional structural-lithologic hydrocarbon reservoirs have undergone adjustment and re-accumulation,and the shale gas resources are well preserved.In the strongly deformed areas,conventional hydrocarbon reservoirs were destroyed,while unconventional hydrocarbon reservoirs have been partially preserved.The marine strata in the Jianghan Basin experienced compression,thrusting,and denudation in the early stage and secondary deep burial in the late stage.Consequently,the unconventional gas resources have been partially preserved in these strata.Secondary hydrocarbon generation become favorable for conventional hydrocarbon accumulations in the marine strata. 展开更多
关键词 multi-directional and multiphase tectonic modification tectonic deformation style differential hydrocarbon enrichment Middle-Upper Yangtze region Sichuan Basin Jianghan Basin petroleum geology
暂未订购 下载PDF
Loading System for Full-Scale Heavy-Duty Support Node Test with Multi-Directional Loading Requirements 认领 引用 被引量：3
16
作者 王玉银 龚超 +1 位作者 张素梅 郭海山 《Transactions of Tianjin University》 EI CAS 2011年第3期166-174,共9页
This paper presents the design, analysis and experimental study of a loading system for heavy-duty nodes test based on a large-scale multi-directional in-plane loading device, which has been used in a full-scale heavy... This paper presents the design, analysis and experimental study of a loading system for heavy-duty nodes test based on a large-scale multi-directional in-plane loading device, which has been used in a full-scale heavy-duty support node test. Test loads of the support reached 6 567 kN with multi-directional loading requirements, which outrange the capacity of the available loading devices. Through the reinforcement of a large-scale multi-directional inplane loading device, the innovative design of a self-balanced load transferring device, and other arrangement considerations of the loading system, the test was implemented and the loading capacity of the ring was considerably enlarged. Due to the heavy loading requirements, some checking computations of the ring and the load transferring device outranged the limit of the Chinese national code "Code for Design of Steel Structures (GB 50017—2003)", thus elastic-plastic finite element (FE) analysis was carried out on the two devices, and also the real-time monitoring on the whole loading systems during experiments to ensure test safety. FE analysis and test results show that the loading system worked elastically during experiments. 展开更多
关键词 loading system self-balanced design multi-directional loading heavy-duty node
暂未订购 下载PDF
A multi-directional controllable multi-scroll conservative chaos generator:Modelling,analysis,and FPGA implementation 认领 引用 被引量：2
17
作者 En-Zeng Dong Rong-Hao Li Sheng-Zhi Du 《Chinese Physics B》 SCIE EI CAS CSCD 2021年第2期232-239,共8页
Combing with the generalized Hamiltonian system theory,by introducing a special form of sinusoidal function,a class of n-dimensional(n=1,2,3)controllable multi-scroll conservative chaos with complicated dynamics is co... Combing with the generalized Hamiltonian system theory,by introducing a special form of sinusoidal function,a class of n-dimensional(n=1,2,3)controllable multi-scroll conservative chaos with complicated dynamics is constructed.The dynamics characteristics including bifurcation behavior and coexistence of the system are analyzed in detail,the latter reveals abundant coexisting flows.Furthermore,the proposed system passes the NIST tests and has been implemented physically by FPGA.Compared to the multi-scroll dissipative chaos,the experimental portraits of the proposed system show better ergodicity,which have potential application value in secure communication and image encryption. 展开更多
关键词 multi-directional controllable multi-scroll conservative chaos coexisting flows field programmable gate array(FPGA)
暂未订购 下载PDF
Multi-scale analysis of void evolution in large-section plastic mold steel during multi-directional forging 认领 引用 被引量：1
18
作者 Xuan Chen Bo-ya Wu +2 位作者 Bo-liang Wu Xiao-chun Wu Jun-wan Li 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2022年第12期1961-1977,共17页
The void evolution of large-section plastic mold steel during multi-directional forging(MDF)was investigated using multiscale analysis.To simulate the forging process of the plastic mold steel(SDP1 steel)and realize m... The void evolution of large-section plastic mold steel during multi-directional forging(MDF)was investigated using multiscale analysis.To simulate the forging process of the plastic mold steel(SDP1 steel)and realize micro-void reconstruction in a representative volume element(RVE),MDF experiment and void-characteristic evaluation of the SDP1 steel were carried out.Traditional upsetting and stretching forging(TUSF)and MDF were simulated to comparatively analyze the evolution of temperature,effective stress,and effective strain.By embedding RVE with a micro-void and using boundary condition by point tracking into the forging process,the single-void evolution in TUSF and MDF was studied.The effect of void orientation on single-void evolution was also investigated.The multi-scale analysis revealed the following results.(1)Compared with TUSF,MDF achieved a higher efficiency in void closure.(2)The closing efficiency of the void increased with the increase in angle h(the angle between the Z and long axes of the void).(3)The closing efficiency increased with the increase in the orientation angle during the forging process.On the basis of the important role of the main stress in each forging step on the void closure,an integral formula of the main stress was proposed.When main compressive-stress integration reached-0.4,the closed state of the void could be accurately determined. 展开更多
关键词 Plastic mold steel Multi-directional forging Multi-scale analysis Representative volume element Void
暂未订购 下载PDF
Dynamic and Static Aging Precipitation of β-Mg17Al12 in the AZ80 Magnesium Alloy During Multi-directional Forging and Subsequent Aging 认领 引用 被引量：1
19
作者 Qing-Feng Zhu Gao-Song Wang +3 位作者 En-Ge Zhang Fan-Zheng Liu Zhi-Qiang Zhang Jian-Zhong Cui 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2017年第10期941-948,共8页
Dynamic and static aging precipitation of Mg17Al12 phases in AZ80 magnesium alloy was studied by multidirectional forging（MDF） with decreasing temperatures from 410 to 300 ℃ and subsequent aging process. The result... Dynamic and static aging precipitation of Mg17Al12 phases in AZ80 magnesium alloy was studied by multidirectional forging（MDF） with decreasing temperatures from 410 to 300 ℃ and subsequent aging process. The results show that the morphology of the β-Mg17Al12 phases during forging process dynamically precipitates and aging process（statically precipitation） exhibited granular and laminar shapes, respectively. During the MDF, the inhomogeneous dynamic precipitation of the β-Mg17Al12 phases results in the uniformity on grain size, which is fine in the area with many granular Mg17Al12 phases but the grain is still coarse where there is no Mg17Al12 phases. During the aging process, the morphology of newly formed β-Mg17Al12 phases depends on the structural character of the forged sample. The newly precipitated β-Mg17Al12 phases are coarse laminar and needle-like shape in area with coarse grain. While, the fine newly precipitated β-Mg17Al12 phases are fine granular and needle-like in the area with fine grain. 展开更多
关键词 Dynamic strain aging Precipitation AZ80 magnesium alloy Multi-directional forging Dynamic recrystallization
暂未订购 下载PDF
Oblique and Multi-Directional Random Wave Loads on Vertical Breakwaters 认领 引用 被引量：10
20
作者 俞聿修 李本霞 张宁川 《海洋工程：英文版》 2003年第2期189-202,共14页
Extensive 3-D model tests have been performed to study the effects of wave obliquity and multi-directionality on the wave loads acting on vertical breakwaters. The variation of horizontal and uplift forces acting on a... Extensive 3-D model tests have been performed to study the effects of wave obliquity and multi-directionality on the wave loads acting on vertical breakwaters. The variation of horizontal and uplift forces acting on an unit length of a breakwater with wave direction, the longitudinal distribution of wave forces, as well as the longitudinal load reduction are analyzed. Some empirical formulae of the longitudinal distribution coefficient and the longitudinal load reduction factor are presented for practical use. 展开更多
关键词 vertical breakwaters oblique wave multi-directional random wave longitudinal distribution wave forces longitudinal load reduction
暂未订购 下载PDF
已选0条
引用分析
参考文献
引证文献
 统计分析
检索结果
已选文献
上一页 1 2 … 4 下一页 到第 页
在线咨询 使用帮助 返回顶部 意见反馈