Palladium(Pd)has long been constrained as a potential catalyst for CO2reduction reactions(CO2RR)due to significant deactivation caused by strongly adsorbed carbonaceous intermediates on its surface,severely limi...Palladium(Pd)has long been constrained as a potential catalyst for CO2reduction reactions(CO2RR)due to significant deactivation caused by strongly adsorbed carbonaceous intermediates on its surface,severely limiting its catalytic activity and stability.To address this critical bottleneck,this study proposes and implements a synergistic regulation strategy combining alloying and spatial confinement effects.This approach designs a composite catalyst by encapsulating boron-silver co-doped palladium alloy nanoparticles(B-Ag4Pd6)within hollow porous resin carbon spheres(HPRCS).In an H-cell,this catalyst achieved a CO Faradaic efficiency of 96.19%at jCO=24.8 mA/cm2 and maintained stable performance for 80 h.Even under flow cell conditions,it sustained 91.23%CO selectivity at jCO=157.86 mA/cm2 over 60 h.Experimental comparisons confirmed the significant promoting effect of spatial confinement on CO2RR.Furthermore,in situ ATR-FTIR spectroscopy and density functional theory(DFT)calculations reveal that B/Ag alloying downshifts the Pd d-band center,optimizes(*)^COOH and(*)^CO adsorption,and the confined Hmicroenvironment accelerates CO formation while suppressing hydrogen evolution.This study not only successfully addressed the issue of carbon intermediate poisoning on Pd surfaces through alloying and microenvironmental regulation,but also provides novel insights and approaches for designing high-performance CO2RR catalysts that integrate electronic structure control with microenvironmental engineering.展开更多
The inherent irreducibility and limited sulfur dioxide tolerance of zeolites constrain oxygen exchange efficiency in palladium/zeolite catalysts,which can adversely affect their performance in methane combustion.Herei...The inherent irreducibility and limited sulfur dioxide tolerance of zeolites constrain oxygen exchange efficiency in palladium/zeolite catalysts,which can adversely affect their performance in methane combustion.Herein,a novel molecular sieve(Silicate-1,denoted as S-1)catalyst functionalized with rare earth oxide sites was developed for catalytic methane combustion.Although both Pd/S-1@CeO2-30(in which CeO2content was 30 wt.%)and Pd/S-1 catalysts demonstrated comparable initial catalytic activities,the Pd/S-1@CeO2-30 sample achieved a methane reaction rate of 114.0μmol/(gPd·s)and the highest TOFPd(0.033s-1),with a 90%methane conversion at 424℃ at a space velocity of 20,000 mL/(g h).The CeO2shell in Pd/S-1@CeO2-30 exhibited the superior longterm stability that was attributed to the redox property of CeO2,which could facilitate the provision of abundant oxygen species.As a result,the Pd/S-1@CeO2-30 catalyst maintained stable performance in 10,000-ppm CH4methane combustion at 400℃ and retained a high CH4conversion efficiency even under exposure to 50 ppm SO2.Similarly,Ce0.6Zr0.4O2or Sm2O3shell also demonstrated comparable SO2resistance.Detailed characterization results revealed that CeO2acted as an exceptional redox center,significantly enhanced SO2adsorption,and effectively inhibited the poisoning of the active PdO sites by SO2,leading to a notable improvement in sulfur dioxide tolerance.These findings highlighted the critical role of the core-shell structure in enhancing catalyst resistance to SO2poisoning during methane combustion.The present work provides valuable insights into the appropriate designing of advanced core-shell catalysts with improved durability and performance in the sulfur dioxide-containing environments.展开更多
Ce-Zr-Al-Nd2O3 (CZAN) support materials were prepared by co-precipitation and impregnation methods, respectively. They were characterized by X-ray diffTaction (XRD), low temperature nitrogen adsorption-desorption,...Ce-Zr-Al-Nd2O3 (CZAN) support materials were prepared by co-precipitation and impregnation methods, respectively. They were characterized by X-ray diffTaction (XRD), low temperature nitrogen adsorption-desorption, oxygen pulsing technique, H2-temperamre programmed reduction (H2-TPR) and X-ray photoelectron spectroscopy (XPS). The Pd-only three-way catalysts (Pd-TWC) supported on these materials were prepared by incipient wetness method and studied by activity tests. The results demonstrated that the CZAN supports obtained by the two methods showed better structural, textural and redox properties than the CZA without Nd2O3, and the addition of Nd203 improved the catalytic activity of TWC. Especially, the CZAN-i support prepared by impregnation method had better thermal stability and redox property. Meanwhile, the Pd/CZAN-i catalyst exhibited the best catalytic performance. XPS measurements indicated that the Nd-modified samples possessed more Ce3+ and oxygen vacancies on the surface of samples, which led to a better redox property. The excellent redox property of support materials helped to improve the catalytic activity of TWC.展开更多
Direct synthesis of dimethyl carbonate(DMC)from CO2 is critical for achieving carbon neutrality,yet the sluggish formation and conversion of the key*CH₃OCOO intermediate-due to the difficulty of C-O coupling-limit ...Direct synthesis of dimethyl carbonate(DMC)from CO2 is critical for achieving carbon neutrality,yet the sluggish formation and conversion of the key*CH₃OCOO intermediate-due to the difficulty of C-O coupling-limit high DMC yields.Herein,we developed a boric acid-assisted recrystallization strategy to fabricate grain-boundary-rich CeO2 hollow nanospheres,which serve as an efficient catalyst for CO2 to DMC synthesis.The introduction of grain-boundary(GBs)induced the electron redistribution,which led a decrease in the electron density of bulk Ce ions and created a localized electron-rich region at homogeneous interface.This unique electronic landscape promoted reactive methoxy formation and stronger CO2 adsorption,thereby enabling more efficient coupling of*CH3O and*CO2 to form the*CH3OCOO.Concurrently,the enhanced CO2 adsorption facilitated the dissociation of*CH3OCOO and subsequent DMC formation.As a result,the 4%BCeO2-GBs achieved an advantageous DMC yield of 19.8 mmol/g.In the assistance of dehydrating agent,the catalyst delivered a remarkable 264.2 mmol/g DMC yield and 7.12%methanol conversion,which was 32 times higher than commercial CeO2.This study elucidated the intrinsic mechanisms governing*CH3OCOO intermediate behavior and offers valuable guidance for CO2 converting into high-value organic chemicals.展开更多
N2O is a major by-product emitted during low-temperature selective catalytic reduction of NO with NH3(NH3-SCR), which causes a series of serious environmental problems. A full understanding of the N2O formation mechan...N2O is a major by-product emitted during low-temperature selective catalytic reduction of NO with NH3(NH3-SCR), which causes a series of serious environmental problems. A full understanding of the N2O formation mechanism is essential to suppress the N2O emission during the low-temperature NH3-SCR, and requires an intensive study of this heterogeneous catalysis process. In this study, we investigated the reaction between NH3 and NO over a Pd/CeO2 catalyst in the absence of O2, using X-ray photoelectron spectroscopy, NH3-temperature-programmed desorption, NO-temperature-programmed desorption, and in-situ Fourier-transform infrared spectroscopy. Our results indicate that the N2O formation mechanism is reaction-temperature-dependent. At temperatures below 250 ℃, the dissociation of HON, which is produced from the reaction between surface H· adatoms and adsorbed NO, is the key process for N2O formation. At temperatures above 250 ℃,the reaction between NO and surface N·, which is produced by NO dissociation, is the only route for N2O formation, and the dissociation of NO is the rate-determining step. Under optimal reaction conditions, a high performance with nearly 100% NO conversion and 100% N2 selectivity could be achieved. These results provide important information to clarify the mechanism of N2O formation and possible suppression of N2 O emission during low-temperature NH3-SCR.展开更多
The oxidative properties and characterization of CuO, CeO 2 and CuO/CeO 2 cata lysts were examined by means of a CO micro-reactor GC system, TPR, XPS and X-r ay diffraction Rietveld methods. The results show that eith...The oxidative properties and characterization of CuO, CeO 2 and CuO/CeO 2 cata lysts were examined by means of a CO micro-reactor GC system, TPR, XPS and X-r ay diffraction Rietveld methods. The results show that either CuO or CeO 2 ac tivity is quite low for CO oxidation. However, when CuO and CeO 2 are mixed, the oxidative activity of the catalyst increases significantly, probably owing to the valency status of copper species (Cu 2+ and Cu+) on the CeO 2 surfa ce, the dispersion and reducibility. XPS surface analysis shows that CuO loading is very important in forming of either Cu 2+ or Cu+. Rietveld analysis s hows that some CuO, which has smaller ion radius than Ce 4+, enters the Ce O 2 lattice after CuO and CeO 2 are mixed. When the CuO loading reaches 5.0%, the size of CuO crystals is a minimum (6.1 nm) and the micro-strain value i s a maximum (2.86×10 -3), resulting in high surface energy and the best ac tivity for CO oxidation.展开更多
This work examines the influence of preparation methods on the physicochemical properties and catalytic performance of MnOx‐CeO2 catalysts for selective catalytic reduction of NO by NH3 (NH3‐SCR) at low temperature....This work examines the influence of preparation methods on the physicochemical properties and catalytic performance of MnOx‐CeO2 catalysts for selective catalytic reduction of NO by NH3 (NH3‐SCR) at low temperature. Five different methods, namely, mechanical mixing, impregnation,hydrothermal treatment, co‐precipitation, and a sol‐gel technique, were used to synthesizeMnOx‐CeO2 catalysts. The catalysts were characterized in detail, and an NH3‐SCR model reaction waschosen to evaluate the catalytic performance. The results showed that the preparation methodsaffected the catalytic performance in the order: hydrothermal treatment > sol‐gel > co‐precipitation> impregnation > mechanical mixing. This order correlated with the surface Ce3+ and Mn4+ content,oxygen vacancies and surface adsorbed oxygen species concentration, and the amount of acidic sitesand acidic strength. This trend is related to redox interactions between MnOx and CeO2. The catalystformed by a hydrothermal treatment exhibited excellent physicochemical properties, optimal catalyticperformance, and good H2O resistance in NH3‐SCR reaction. This was attributed to incorporationof Mnn+ into the CeO2 lattice to form a uniform ceria‐based solid solution (containing Mn‐O‐Cestructures). Strengthening of the electronic interactions between MnOx and CeO2, driven by thehigh‐temperature and high‐pressure conditions during the hydrothermal treatment also improved the catalyst characteristics. Thus, the hydrothermal treatment method is an efficient and environment‐friendly route to synthesizing low‐temperature denitrification (deNOx) catalysts.展开更多
CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were ...CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were examined by means of a microreactor-GC system, HRTEM, XRD, TPR and XPS techniques. The results show that CuO has not catalytic activity and the activity of CeO2 is quite low for CO oxidation. However, the catalytic activity of CuO/CeO2 and Cu/ CeO2 catalysts increases significantly. Furthermore, the activity of CuO/CeO2 is higher than that of Cu/CeO2 catalysts.展开更多
The electrocatalytic activity and stability of Pt/C catalyst modified by using CeO_2-ZrO_2 mixed oxides for the alcohols electrochemical oxidation as probes were investigated. The catalyst samples were characterized b...The electrocatalytic activity and stability of Pt/C catalyst modified by using CeO_2-ZrO_2 mixed oxides for the alcohols electrochemical oxidation as probes were investigated. The catalyst samples were characterized by X-ray diffraction(XRD) and scanning electron microscopy(SEM). The electrochemical properties were measured by a three electrode system on electrochemical workstation(IVIUM). The results showed that the presence of CeO_2-ZrO_2 might be associated with the presence of Pt, which indicated that possibly there was synergistic effect between CeO_2-ZrO_2 and Pt nanoparticles. The electrocatalytic activity and stability of Pt-MO_x/C(M=Ce, Zr) for methanol and ethanol oxidation was better than that of Pt-CeO_2/C, which was attributed to that CeO_2-ZrO_2 composited oxides enhanced oxygen mobility and promoted oxygen storage capacity(OSC). Furthermore, the best performance was found when the molar ratio of CeO_2 to ZrO_2 was 2:1 for the oxidation of methanol and ethanol. The forward peak current density of Pt-MO_x/C(M=Ce, Zr, Ce:Zr=2:1) towards the methanol electrooxidation was about 3.8 times that of Pt-CeO_2/C. Pt-MO_x/C(M=Ce, Zr) appeared to be a promising and less expensive methanol oxidation anode catalyst.展开更多
Reverse water gas shift (RWGS) reaction can serve as a pivotal stage in the CO2 conversion processes, which is vital for the utilization of CO2. In this study, RWGS reaction was performed over Pt/CeO2 catalysts at the...Reverse water gas shift (RWGS) reaction can serve as a pivotal stage in the CO2 conversion processes, which is vital for the utilization of CO2. In this study, RWGS reaction was performed over Pt/CeO2 catalysts at the temperature range of 200-500 degrees C under ambient pressure. Compared with pure CeO2, Pt/CeO2 catalysts exhibited superior RWGS activity at lower reaction temperature. Meanwhile, the calculated TOF and E-a values are approximately the same over these Pt/CeO2 catalysts pretreated under various calcination conditions, indicating that the RWGS reaction is not affected by the morphologies of anchored Pt nanoparticles or the primary crystallinity of CeO2. TPR and XPS results indicated that the incorporation of Pt promoted the reducibility of CeO2 support and remarkably increased the content of Ce 3 + sites on the catalyst surface. Furthermore, the CO TPSR-MS signal under the condition of pure CO2 flow over Pt/CeO 2 catalyst is far lower than that under the condition of adsorbed CO2 with H-2 -assisted flow, revealing that CO2 molecules adsorbed on Ce3+ active sites have difficult in generating CO directly. Meanwhile, the adsorbed CO2 with the assistance of H-2 can form formate species easily over Ce3+ active sites and then decompose into Ce3+-CO species for CO production, which was identified by in-situ FTIR. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B. V. and Science Press. All rights reserved.展开更多
The nanometer CeO2 powder was prepared by the method of microwave-assisted heating hydrolysis,and the nanometer CeO2-supported or ordinary CeO2-supported vanadia catalysts with different vanadium loadings(atomic ratio...The nanometer CeO2 powder was prepared by the method of microwave-assisted heating hydrolysis,and the nanometer CeO2-supported or ordinary CeO2-supported vanadia catalysts with different vanadium loadings(atomic ratios:100V/Ce=0.1,1,4,10,and 20) were prepared by an incipient-wetness impregnation method.Spectroscopic techniques(XRD,FT-IR,Raman and UV-Vis DRS) were utilized to characterize the structures of VOx/CeO2 catalysts.The results showed that the structures of CeO2-supported vanadium oxide catalysts de...展开更多
The catalytic behaviors of Pd (1.4 wt.%) catalysts supported on CeO2-ZrO2 promoted with La2O3 were investigated for methanol decomposition. The measurements of inductively coupled plasma emission spectroscopy (ICP...The catalytic behaviors of Pd (1.4 wt.%) catalysts supported on CeO2-ZrO2 promoted with La2O3 were investigated for methanol decomposition. The measurements of inductively coupled plasma emission spectroscopy (ICP), N2 adsorption-desorption (BET), powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR) and oxygen storage capacity (OSC) were used to characterize the properties of catalysts. The catalysts' activities were tested in a fixed bed continuous flow reactor operating under atmospheric pressure. The Pd/Ce0.8Zr0.2O2-5 wt.%La2O3 catalyst exhibited the best activity. The reasons for this were twofold: (1) doping of La improved effectively textural properties of CeO2-ZrO2 oxygen storage materials, and (2) Pd/Ce0.8Zr0.2O2-5 wt.%La2O3 possessed super oxygen storage property and reducibility due to the existence of lattice defect oxygen or mobile oxygen, which helped to re-oxidize zerovalent Pd0 to a partly oxidized Pdδ+. By introducing 5 wt.%La2O3, the specific surface area of the sample increased, but declined if further increasing the content of La2O3 to 10 wt.%.展开更多
The atomic structure of the active sites in Cu/CeO2 catalysts is intimately associated with the copper-ceria interaction. Both the shape of ceria and the loading of copper affect the chemical bonding of copper species...The atomic structure of the active sites in Cu/CeO2 catalysts is intimately associated with the copper-ceria interaction. Both the shape of ceria and the loading of copper affect the chemical bonding of copper species on ceria surfaces and the electronic and geometric character of the relevant interfaces. Nanostructured ceria, including particles(polyhedra), rods, and cubes, provides anchoring sites for the copper species. The atomic arrangements and chemical properties of the(111),(110) and(100) facets, preferentially exposed depending on the shape of ceria, govern the copper-ceria interactions and in turn determine their catalytic properties. Also, the metal loading significantly influences the dispersion of copper species on ceria with a specific shape, forming copper layers, clusters, and nanoparticles. Lower copper contents result in copper monolayers and/or bilayers while higher copper loadings lead to multi-layered clusters and faceted particles. The active sites are usually generated via interactions between the copper atoms in the metal species and the oxygen vacancies on ceria, which is closely linked to the number and density of surface oxygen vacancies dominated by the shape of ceria.展开更多
High surface area CeO2 was prepared by the surfactant-assisted route and was employed as catalyst support. The 0-3 at.% Cu doped Cu-Ni/CeO2 catalysts with 10 wt.% and 15 wt.% of total metal loading were prepared by an...High surface area CeO2 was prepared by the surfactant-assisted route and was employed as catalyst support. The 0-3 at.% Cu doped Cu-Ni/CeO2 catalysts with 10 wt.% and 15 wt.% of total metal loading were prepared by an impregnation-coprecipitation method. The influence of Cu atomic content on the catalytic performance was investigated on the steam reforming of ethanol (SRE) for H2 production and the catalysts were characterized by N2 adsorption, inductively coupled plasma (ICP), X-ray diffraction (XRD), transmission electron microscopy (TEM), temperature-programmed rerduction (TPR) and H2-pulse chemisorption techniques. The activity and products distribution behaviors of the catalysts were significantly affected by the doped Cu molar content based on the promotion effect on the dispersion of NiO particles and the interactions between Cu-Ni metal and CeO2 support. Significant increase in the ethanol conversion and hydrogen selectivity were obtained when moderate Cu metal was doped into the Ni/CeO2 catalyst. Over both of the 10Ni98.5Cu1.5/CeO2 and 15Ni98.5Cu1.5/CeO2 catalysts, more than 80% of ethanol conversion and 60% of H2 selectivity were obtained in the ethanol steam-reforming when the reaction temperature was above 450 ℃.展开更多
This paper presented a study on the role of yttrium addition to CuO/CeO2 catalyst for water-gas shift reaction. A single-step co-precipitation method was used for preparation of a series of yttrium doped CuO/CeO2 cata...This paper presented a study on the role of yttrium addition to CuO/CeO2 catalyst for water-gas shift reaction. A single-step co-precipitation method was used for preparation of a series of yttrium doped CuO/CeO2 catalysts with yttrium content in the range of 0-5wt.%. Properties of the obtained samples were characterized and analyzed by X-ray diffraction (XRD), Raman spectroscopy, H2-TPR, cyclic voltammetry (CV) and the BET method. The results revealed that catalytic activity was increased with the yttrium content at first, but then decreased with the further increase of yttrium content. Herein, CuO/CeO2 catalyst doped with 2wt.% of yttrium showed the highest catalytic activity (CO conversion reaches 93.4% at 250 ℃) and thermal stability for WGS reaction. The catalytic activity was correlated with the surface area, the area of peak γ of H2-TPR profile (i.e., the reduction of surface copper oxide (crystalline forms) interacted with surface oxygen vacancies on ceria), and the area of peak C2 and A1 (Cu^0→←Cu^2+ in cyclic voltammetry process), respectively. Besides, Raman spectra provided evidences for a synergistic Cu-Ovacancy interaction, and it was indicated that doping yttrium may facilitate the formation of oxygen vacancies on ceria.展开更多
Anatase TiO2nanospindles containing 89%exposed{101}facets(TIO2-101)and nanosheets with 77%exposed{001}facets(TiO2-001)were hydrothermally synthesized and used as supports for Pd catalysts.The effects of the T...Anatase TiO2nanospindles containing 89%exposed{101}facets(TIO2-101)and nanosheets with 77%exposed{001}facets(TiO2-001)were hydrothermally synthesized and used as supports for Pd catalysts.The effects of the TiO2materials on the catalytic performance of Pd/TiO2-101 and Pd/TiO2-001 catalysts were investigated in the selective hydrogenation of acetylene to polymer-grade ethylene.The PdfTiO2-101 catalyst exhibited enhanced performance in terms of acetylene conversion and ethylene yield.To understand these effects,the catalysts were characterized by H2temperature-programmed desorption(H2-TPD),H2temperature-programmed reduction(H=-TPR),transmission electron microscopy(TEM),pulse CO chemisorption,X-ray photoelectron spectroscopy(XPS),and thermogravimetric analysis(TGA).The TEM and CO chemisorption results confirmed that Pd nanoparticles(NPs)on the TiO2-101 support had a smaller average particle size(1.53 nm)and a higher dispersion(15.95%)than those on the TiO2-001 support(average particle size of 4.36 nm and dispersion of 9.06%).The smaller particle size and higher dispersion of Pd on the Pd/TiO2-101 catalyst provided more reaction active sites,which contributed to the improved catalytic activity of this supported catalyst.展开更多
The present article studies the effect of CeO2 and A1203 on the activity of Pd/Co304/cordierite catalyst in conversion of NO, CO, CnHm. The catalysts were characterized by temperature programmed reduction with hydroge...The present article studies the effect of CeO2 and A1203 on the activity of Pd/Co304/cordierite catalyst in conversion of NO, CO, CnHm. The catalysts were characterized by temperature programmed reduction with hydrogen, X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. It is shown that the effect of CeO2 on the properties of Pd/C03 O4/cordierite catalyst depends on preparation method. The catalyst obtained by co-deposition of cerium and cobalt oxides has higher activity in CO oxidation (CO + 02 and CO + NO) and total hexane oxidation (C6H14 + 02). Such phenomenon is probably caused by more than stoichiometric amount of formed oxygen vacancies, an increase in both mobility of surface oxygen and dispersity of components in the catalytic composition. It is demonstrated that CeO2 addition promotes the SO2 resistance of Pd/C03 O4/cordierite. The second support decreases the activity of Pd/Co3Oa/cordierite catalyst in the reactions of CO and C6H14 with oxygen because of COA1204 formation.展开更多
The Co/CeO2 catalysts promoted with Ba or K were prepared to study the effect of promoter on the catalytic performance of ammonia synthesis. The results show that the presence of Ba or K promoter changes the propertie...The Co/CeO2 catalysts promoted with Ba or K were prepared to study the effect of promoter on the catalytic performance of ammonia synthesis. The results show that the presence of Ba or K promoter changes the properties of CeO2-supported Co catalysts including the surface area, the crystallite size and the morphology of CeO2, the reduction degree of cobalt species and the adsorption performance of hydrogen and nitrogen. As a consequence, the samples promoted with an appropriate amount of Ba show higher ammonia synthesis rates, while the catalysts with high Ba loading or K promoter all exhibit low catalytic activities.展开更多
This study was focused on the influence of active oxygen on the performance of Pt/CeO2 catalysts for CO oxidation. A series of CeO2 supports with different contents of active oxygen were obtained by adding surfactant ...This study was focused on the influence of active oxygen on the performance of Pt/CeO2 catalysts for CO oxidation. A series of CeO2 supports with different contents of active oxygen were obtained by adding surfactant at different synthesis steps. 0.25 wt% Pt was loaded on these CeO2 supports by incipientwetness impregnation methods. The catalysts were characterized by N2 adsorption, X-ray diffraction(XRD), high-resolution transmission electron microscopy(HRTEM), H2 temperature-programmed reduction(H2-TPR), dynamic oxygen storage capacity(DOSC) and in-situ DRIFTS technologies. For S-f supports, the surfactant was added into the solution before spray-drying in the synthesis process, which facilitates more active oxygen formation on the surface of CeO2. After loading Pt, the more active oxygen on CeO2 contributes to dispersing Pt species and enhancing the CO oxidation activity. As for the aged samples,Pt-R-h shows the highest activity above 190 ℃ because of the presence of more partly oxidized Pt^(δ+) species. Thus the activity is also influenced by the states of Pt and the Pt^(δ+) species may contribute to the high activity at elevated temperature.展开更多
CeO2-promoted Ni/Al2O3-ZrO2 (Ni/Al2O3-ZrO2-CeO2) catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared s...CeO2-promoted Ni/Al2O3-ZrO2 (Ni/Al2O3-ZrO2-CeO2) catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared spectroscopy (IR), thermal gravimetric analysis (TGA), microscopic analysis, X-ray diffraction (XRD) and temperature-programmed reduction (TPR). The catalytic performance for CO2 reforming of methane to synthesis gas was investigated in a continuous-flow micro-reactor under atmospheric pressure. TGA, IR, XRD and microscopic analysis show that the catalysts prepared by the direct sol-gel process consist of Ni particles with a nanostructure of around 5 nm and an amorphous-phase composite oxide support. There exists a chemical interaction between metallic Ni particles and supports, which makes metallic Ni well dispersed, highly active and stable. The addition of CeO2 effectively improves the dispersion and the stability of Ni particles of the prepared catalysts, and enhances the adsorption of CO2 on the surface of catalysts. The catalytic tests for methane reforming with CO2 to synthesis gas show that the Ni/Al2O3-ZrO2-CeO2 catalysts show excellent activity and stability compared with the Ni/Al2O3 catalyst. The excellent catalytic activity and stability of the Ni/Al2O3-ZrO2-CeO2 are attributed to the highly, uniformly and stably dispersed small metallic Ni particles, the high reducibility of the Ni oxides and the interaction between metallic Ni particles and the composite oxide supports.展开更多
基金financial support from the National Natural Science Foundation of China(72088101,22474157)the Major Program from Xiangjiang Laboratory(23XJ01010,23XJ01011)+2 种基金the Natural Science Foundation of Hunan Province(2024JJ5417)the Innovation-Driven Project of Central South University(2023CXQD048)the Changsha Natural Science Foundation Project(kq2402199)。
摘要Palladium(Pd)has long been constrained as a potential catalyst for CO2reduction reactions(CO2RR)due to significant deactivation caused by strongly adsorbed carbonaceous intermediates on its surface,severely limiting its catalytic activity and stability.To address this critical bottleneck,this study proposes and implements a synergistic regulation strategy combining alloying and spatial confinement effects.This approach designs a composite catalyst by encapsulating boron-silver co-doped palladium alloy nanoparticles(B-Ag4Pd6)within hollow porous resin carbon spheres(HPRCS).In an H-cell,this catalyst achieved a CO Faradaic efficiency of 96.19%at jCO=24.8 mA/cm2 and maintained stable performance for 80 h.Even under flow cell conditions,it sustained 91.23%CO selectivity at jCO=157.86 mA/cm2 over 60 h.Experimental comparisons confirmed the significant promoting effect of spatial confinement on CO2RR.Furthermore,in situ ATR-FTIR spectroscopy and density functional theory(DFT)calculations reveal that B/Ag alloying downshifts the Pd d-band center,optimizes(*)^COOH and(*)^CO adsorption,and the confined Hmicroenvironment accelerates CO formation while suppressing hydrogen evolution.This study not only successfully addressed the issue of carbon intermediate poisoning on Pd surfaces through alloying and microenvironmental regulation,but also provides novel insights and approaches for designing high-performance CO2RR catalysts that integrate electronic structure control with microenvironmental engineering.
基金supported by the National Key R&D Program of China(Nos.2022YFB3504101 and 2022YFB3506200)the National Natural Science Foundation of China(Nos.22322601 and 22425601)the R&D Program of Beijing Municipal Education Commission(No.KZ202210005011)。
摘要The inherent irreducibility and limited sulfur dioxide tolerance of zeolites constrain oxygen exchange efficiency in palladium/zeolite catalysts,which can adversely affect their performance in methane combustion.Herein,a novel molecular sieve(Silicate-1,denoted as S-1)catalyst functionalized with rare earth oxide sites was developed for catalytic methane combustion.Although both Pd/S-1@CeO2-30(in which CeO2content was 30 wt.%)and Pd/S-1 catalysts demonstrated comparable initial catalytic activities,the Pd/S-1@CeO2-30 sample achieved a methane reaction rate of 114.0μmol/(gPd·s)and the highest TOFPd(0.033s-1),with a 90%methane conversion at 424℃ at a space velocity of 20,000 mL/(g h).The CeO2shell in Pd/S-1@CeO2-30 exhibited the superior longterm stability that was attributed to the redox property of CeO2,which could facilitate the provision of abundant oxygen species.As a result,the Pd/S-1@CeO2-30 catalyst maintained stable performance in 10,000-ppm CH4methane combustion at 400℃ and retained a high CH4conversion efficiency even under exposure to 50 ppm SO2.Similarly,Ce0.6Zr0.4O2or Sm2O3shell also demonstrated comparable SO2resistance.Detailed characterization results revealed that CeO2acted as an exceptional redox center,significantly enhanced SO2adsorption,and effectively inhibited the poisoning of the active PdO sites by SO2,leading to a notable improvement in sulfur dioxide tolerance.These findings highlighted the critical role of the core-shell structure in enhancing catalyst resistance to SO2poisoning during methane combustion.The present work provides valuable insights into the appropriate designing of advanced core-shell catalysts with improved durability and performance in the sulfur dioxide-containing environments.
基金Project supported by National Natural Science Foundation of China (20773090, 20803049)the Specialized Research Fund for the Doctoral Program of Higher Education (20070610026, 200806100009)
摘要Ce-Zr-Al-Nd2O3 (CZAN) support materials were prepared by co-precipitation and impregnation methods, respectively. They were characterized by X-ray diffTaction (XRD), low temperature nitrogen adsorption-desorption, oxygen pulsing technique, H2-temperamre programmed reduction (H2-TPR) and X-ray photoelectron spectroscopy (XPS). The Pd-only three-way catalysts (Pd-TWC) supported on these materials were prepared by incipient wetness method and studied by activity tests. The results demonstrated that the CZAN supports obtained by the two methods showed better structural, textural and redox properties than the CZA without Nd2O3, and the addition of Nd203 improved the catalytic activity of TWC. Especially, the CZAN-i support prepared by impregnation method had better thermal stability and redox property. Meanwhile, the Pd/CZAN-i catalyst exhibited the best catalytic performance. XPS measurements indicated that the Nd-modified samples possessed more Ce3+ and oxygen vacancies on the surface of samples, which led to a better redox property. The excellent redox property of support materials helped to improve the catalytic activity of TWC.
摘要Direct synthesis of dimethyl carbonate(DMC)from CO2 is critical for achieving carbon neutrality,yet the sluggish formation and conversion of the key*CH₃OCOO intermediate-due to the difficulty of C-O coupling-limit high DMC yields.Herein,we developed a boric acid-assisted recrystallization strategy to fabricate grain-boundary-rich CeO2 hollow nanospheres,which serve as an efficient catalyst for CO2 to DMC synthesis.The introduction of grain-boundary(GBs)induced the electron redistribution,which led a decrease in the electron density of bulk Ce ions and created a localized electron-rich region at homogeneous interface.This unique electronic landscape promoted reactive methoxy formation and stronger CO2 adsorption,thereby enabling more efficient coupling of*CH3O and*CO2 to form the*CH3OCOO.Concurrently,the enhanced CO2 adsorption facilitated the dissociation of*CH3OCOO and subsequent DMC formation.As a result,the 4%BCeO2-GBs achieved an advantageous DMC yield of 19.8 mmol/g.In the assistance of dehydrating agent,the catalyst delivered a remarkable 264.2 mmol/g DMC yield and 7.12%methanol conversion,which was 32 times higher than commercial CeO2.This study elucidated the intrinsic mechanisms governing*CH3OCOO intermediate behavior and offers valuable guidance for CO2 converting into high-value organic chemicals.
基金support of the National Key Research and Development Program of China(2017YFB0310403)the National Natural Science Foundation of China(51872260,51390474,91645103)+2 种基金the Ministry of Science and Technology of China(2016YFE0105700)the Environmentally Sustainable Management of Medical Wastes in China(C/V/S/10/251)the Zhejiang Provincial Natural Science Foundation of China(Z4080070,LD19B030001)~~
摘要N2O is a major by-product emitted during low-temperature selective catalytic reduction of NO with NH3(NH3-SCR), which causes a series of serious environmental problems. A full understanding of the N2O formation mechanism is essential to suppress the N2O emission during the low-temperature NH3-SCR, and requires an intensive study of this heterogeneous catalysis process. In this study, we investigated the reaction between NH3 and NO over a Pd/CeO2 catalyst in the absence of O2, using X-ray photoelectron spectroscopy, NH3-temperature-programmed desorption, NO-temperature-programmed desorption, and in-situ Fourier-transform infrared spectroscopy. Our results indicate that the N2O formation mechanism is reaction-temperature-dependent. At temperatures below 250 ℃, the dissociation of HON, which is produced from the reaction between surface H· adatoms and adsorbed NO, is the key process for N2O formation. At temperatures above 250 ℃,the reaction between NO and surface N·, which is produced by NO dissociation, is the only route for N2O formation, and the dissociation of NO is the rate-determining step. Under optimal reaction conditions, a high performance with nearly 100% NO conversion and 100% N2 selectivity could be achieved. These results provide important information to clarify the mechanism of N2O formation and possible suppression of N2 O emission during low-temperature NH3-SCR.
摘要The oxidative properties and characterization of CuO, CeO 2 and CuO/CeO 2 cata lysts were examined by means of a CO micro-reactor GC system, TPR, XPS and X-r ay diffraction Rietveld methods. The results show that either CuO or CeO 2 ac tivity is quite low for CO oxidation. However, when CuO and CeO 2 are mixed, the oxidative activity of the catalyst increases significantly, probably owing to the valency status of copper species (Cu 2+ and Cu+) on the CeO 2 surfa ce, the dispersion and reducibility. XPS surface analysis shows that CuO loading is very important in forming of either Cu 2+ or Cu+. Rietveld analysis s hows that some CuO, which has smaller ion radius than Ce 4+, enters the Ce O 2 lattice after CuO and CeO 2 are mixed. When the CuO loading reaches 5.0%, the size of CuO crystals is a minimum (6.1 nm) and the micro-strain value i s a maximum (2.86×10 -3), resulting in high surface energy and the best ac tivity for CO oxidation.
基金supported by the National Natural Science Foundation of China (No. 21507130)the Open Project Program of Beijing National Laboratory for Molecular Sciences (No. 20140142)+3 种基金the Open Project Program of Chongqing Key Laboratory of Environmental Materials and Remediation Technology from Chongqing University of Arts and Sciences (No. CEK1405)the Open Project Program of Jiangsu Key Laboratory of Vehicle Emissions Control (No. OVEC001)the Open Project Program of Chongqing Key Laboratory of Catalysis and Functional Organic Molecules from Chongqing Technology and Business University (1456029)the Chongqing Science & Technology Commission (Nos. cstc2016jcyj A0070, cstc2014pt-gc20002, cstckjcxljrc13)~~
摘要This work examines the influence of preparation methods on the physicochemical properties and catalytic performance of MnOx‐CeO2 catalysts for selective catalytic reduction of NO by NH3 (NH3‐SCR) at low temperature. Five different methods, namely, mechanical mixing, impregnation,hydrothermal treatment, co‐precipitation, and a sol‐gel technique, were used to synthesizeMnOx‐CeO2 catalysts. The catalysts were characterized in detail, and an NH3‐SCR model reaction waschosen to evaluate the catalytic performance. The results showed that the preparation methodsaffected the catalytic performance in the order: hydrothermal treatment > sol‐gel > co‐precipitation> impregnation > mechanical mixing. This order correlated with the surface Ce3+ and Mn4+ content,oxygen vacancies and surface adsorbed oxygen species concentration, and the amount of acidic sitesand acidic strength. This trend is related to redox interactions between MnOx and CeO2. The catalystformed by a hydrothermal treatment exhibited excellent physicochemical properties, optimal catalyticperformance, and good H2O resistance in NH3‐SCR reaction. This was attributed to incorporationof Mnn+ into the CeO2 lattice to form a uniform ceria‐based solid solution (containing Mn‐O‐Cestructures). Strengthening of the electronic interactions between MnOx and CeO2, driven by thehigh‐temperature and high‐pressure conditions during the hydrothermal treatment also improved the catalyst characteristics. Thus, the hydrothermal treatment method is an efficient and environment‐friendly route to synthesizing low‐temperature denitrification (deNOx) catalysts.
基金Projected supported by the National Natural Science Foundation of China (20271028) and Tianjin Natural Science Foundation(033602511)
摘要CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were examined by means of a microreactor-GC system, HRTEM, XRD, TPR and XPS techniques. The results show that CuO has not catalytic activity and the activity of CeO2 is quite low for CO oxidation. However, the catalytic activity of CuO/CeO2 and Cu/ CeO2 catalysts increases significantly. Furthermore, the activity of CuO/CeO2 is higher than that of Cu/CeO2 catalysts.
基金supported by National Natural Science Foundation of China(51474133,21407084)Talent Incubation Funding of School of Materials and Metallurgy(2014CY012)
摘要The electrocatalytic activity and stability of Pt/C catalyst modified by using CeO_2-ZrO_2 mixed oxides for the alcohols electrochemical oxidation as probes were investigated. The catalyst samples were characterized by X-ray diffraction(XRD) and scanning electron microscopy(SEM). The electrochemical properties were measured by a three electrode system on electrochemical workstation(IVIUM). The results showed that the presence of CeO_2-ZrO_2 might be associated with the presence of Pt, which indicated that possibly there was synergistic effect between CeO_2-ZrO_2 and Pt nanoparticles. The electrocatalytic activity and stability of Pt-MO_x/C(M=Ce, Zr) for methanol and ethanol oxidation was better than that of Pt-CeO_2/C, which was attributed to that CeO_2-ZrO_2 composited oxides enhanced oxygen mobility and promoted oxygen storage capacity(OSC). Furthermore, the best performance was found when the molar ratio of CeO_2 to ZrO_2 was 2:1 for the oxidation of methanol and ethanol. The forward peak current density of Pt-MO_x/C(M=Ce, Zr, Ce:Zr=2:1) towards the methanol electrooxidation was about 3.8 times that of Pt-CeO_2/C. Pt-MO_x/C(M=Ce, Zr) appeared to be a promising and less expensive methanol oxidation anode catalyst.
基金National Natural Science Foundation of China (nos.21476226 and 21506204)National Key Projects for Fundamental Research and Development of China (2016YFB0600902)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB17020400)the Youth Innovation Promotion Association CAS for financial support
摘要Reverse water gas shift (RWGS) reaction can serve as a pivotal stage in the CO2 conversion processes, which is vital for the utilization of CO2. In this study, RWGS reaction was performed over Pt/CeO2 catalysts at the temperature range of 200-500 degrees C under ambient pressure. Compared with pure CeO2, Pt/CeO2 catalysts exhibited superior RWGS activity at lower reaction temperature. Meanwhile, the calculated TOF and E-a values are approximately the same over these Pt/CeO2 catalysts pretreated under various calcination conditions, indicating that the RWGS reaction is not affected by the morphologies of anchored Pt nanoparticles or the primary crystallinity of CeO2. TPR and XPS results indicated that the incorporation of Pt promoted the reducibility of CeO2 support and remarkably increased the content of Ce 3 + sites on the catalyst surface. Furthermore, the CO TPSR-MS signal under the condition of pure CO2 flow over Pt/CeO 2 catalyst is far lower than that under the condition of adsorbed CO2 with H-2 -assisted flow, revealing that CO2 molecules adsorbed on Ce3+ active sites have difficult in generating CO directly. Meanwhile, the adsorbed CO2 with the assistance of H-2 can form formate species easily over Ce3+ active sites and then decompose into Ce3+-CO species for CO production, which was identified by in-situ FTIR. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B. V. and Science Press. All rights reserved.
基金supported by the National Natural Science Foundation of China (20803093,20833011,20525621)the Doctor Select Foundation for the University of State Education Ministry (200804251016)+1 种基金the Beijing Outstanding Ph.D.Thesis Foundation (YB 20091141401)the Hi-Tech Research and Development Program (863) of China (SQ2009AA06Z3488052)
摘要The nanometer CeO2 powder was prepared by the method of microwave-assisted heating hydrolysis,and the nanometer CeO2-supported or ordinary CeO2-supported vanadia catalysts with different vanadium loadings(atomic ratios:100V/Ce=0.1,1,4,10,and 20) were prepared by an incipient-wetness impregnation method.Spectroscopic techniques(XRD,FT-IR,Raman and UV-Vis DRS) were utilized to characterize the structures of VOx/CeO2 catalysts.The results showed that the structures of CeO2-supported vanadium oxide catalysts de...
基金Project supported by the Programs Foundation of Ministry of Education of China (20070610026)the National Natural Science Foundation of China (20773090, 20803049)
摘要The catalytic behaviors of Pd (1.4 wt.%) catalysts supported on CeO2-ZrO2 promoted with La2O3 were investigated for methanol decomposition. The measurements of inductively coupled plasma emission spectroscopy (ICP), N2 adsorption-desorption (BET), powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR) and oxygen storage capacity (OSC) were used to characterize the properties of catalysts. The catalysts' activities were tested in a fixed bed continuous flow reactor operating under atmospheric pressure. The Pd/Ce0.8Zr0.2O2-5 wt.%La2O3 catalyst exhibited the best activity. The reasons for this were twofold: (1) doping of La improved effectively textural properties of CeO2-ZrO2 oxygen storage materials, and (2) Pd/Ce0.8Zr0.2O2-5 wt.%La2O3 possessed super oxygen storage property and reducibility due to the existence of lattice defect oxygen or mobile oxygen, which helped to re-oxidize zerovalent Pd0 to a partly oxidized Pdδ+. By introducing 5 wt.%La2O3, the specific surface area of the sample increased, but declined if further increasing the content of La2O3 to 10 wt.%.
摘要The atomic structure of the active sites in Cu/CeO2 catalysts is intimately associated with the copper-ceria interaction. Both the shape of ceria and the loading of copper affect the chemical bonding of copper species on ceria surfaces and the electronic and geometric character of the relevant interfaces. Nanostructured ceria, including particles(polyhedra), rods, and cubes, provides anchoring sites for the copper species. The atomic arrangements and chemical properties of the(111),(110) and(100) facets, preferentially exposed depending on the shape of ceria, govern the copper-ceria interactions and in turn determine their catalytic properties. Also, the metal loading significantly influences the dispersion of copper species on ceria with a specific shape, forming copper layers, clusters, and nanoparticles. Lower copper contents result in copper monolayers and/or bilayers while higher copper loadings lead to multi-layered clusters and faceted particles. The active sites are usually generated via interactions between the copper atoms in the metal species and the oxygen vacancies on ceria, which is closely linked to the number and density of surface oxygen vacancies dominated by the shape of ceria.
基金Project supported by the National Natural Science Foundation (21076047)the Natural Science Foundation of Zhongkai University of Agriculture and Engineering (G3100026)
摘要High surface area CeO2 was prepared by the surfactant-assisted route and was employed as catalyst support. The 0-3 at.% Cu doped Cu-Ni/CeO2 catalysts with 10 wt.% and 15 wt.% of total metal loading were prepared by an impregnation-coprecipitation method. The influence of Cu atomic content on the catalytic performance was investigated on the steam reforming of ethanol (SRE) for H2 production and the catalysts were characterized by N2 adsorption, inductively coupled plasma (ICP), X-ray diffraction (XRD), transmission electron microscopy (TEM), temperature-programmed rerduction (TPR) and H2-pulse chemisorption techniques. The activity and products distribution behaviors of the catalysts were significantly affected by the doped Cu molar content based on the promotion effect on the dispersion of NiO particles and the interactions between Cu-Ni metal and CeO2 support. Significant increase in the ethanol conversion and hydrogen selectivity were obtained when moderate Cu metal was doped into the Ni/CeO2 catalyst. Over both of the 10Ni98.5Cu1.5/CeO2 and 15Ni98.5Cu1.5/CeO2 catalysts, more than 80% of ethanol conversion and 60% of H2 selectivity were obtained in the ethanol steam-reforming when the reaction temperature was above 450 ℃.
基金supported by the National Natural Science Foundation of China (20771025)A-type Science and Technology Projects of Fujian Provincial Department of Education (JA08021)
摘要This paper presented a study on the role of yttrium addition to CuO/CeO2 catalyst for water-gas shift reaction. A single-step co-precipitation method was used for preparation of a series of yttrium doped CuO/CeO2 catalysts with yttrium content in the range of 0-5wt.%. Properties of the obtained samples were characterized and analyzed by X-ray diffraction (XRD), Raman spectroscopy, H2-TPR, cyclic voltammetry (CV) and the BET method. The results revealed that catalytic activity was increased with the yttrium content at first, but then decreased with the further increase of yttrium content. Herein, CuO/CeO2 catalyst doped with 2wt.% of yttrium showed the highest catalytic activity (CO conversion reaches 93.4% at 250 ℃) and thermal stability for WGS reaction. The catalytic activity was correlated with the surface area, the area of peak γ of H2-TPR profile (i.e., the reduction of surface copper oxide (crystalline forms) interacted with surface oxygen vacancies on ceria), and the area of peak C2 and A1 (Cu^0→←Cu^2+ in cyclic voltammetry process), respectively. Besides, Raman spectra provided evidences for a synergistic Cu-Ovacancy interaction, and it was indicated that doping yttrium may facilitate the formation of oxygen vacancies on ceria.
摘要Anatase TiO2nanospindles containing 89%exposed{101}facets(TIO2-101)and nanosheets with 77%exposed{001}facets(TiO2-001)were hydrothermally synthesized and used as supports for Pd catalysts.The effects of the TiO2materials on the catalytic performance of Pd/TiO2-101 and Pd/TiO2-001 catalysts were investigated in the selective hydrogenation of acetylene to polymer-grade ethylene.The PdfTiO2-101 catalyst exhibited enhanced performance in terms of acetylene conversion and ethylene yield.To understand these effects,the catalysts were characterized by H2temperature-programmed desorption(H2-TPD),H2temperature-programmed reduction(H=-TPR),transmission electron microscopy(TEM),pulse CO chemisorption,X-ray photoelectron spectroscopy(XPS),and thermogravimetric analysis(TGA).The TEM and CO chemisorption results confirmed that Pd nanoparticles(NPs)on the TiO2-101 support had a smaller average particle size(1.53 nm)and a higher dispersion(15.95%)than those on the TiO2-001 support(average particle size of 4.36 nm and dispersion of 9.06%).The smaller particle size and higher dispersion of Pd on the Pd/TiO2-101 catalyst provided more reaction active sites,which contributed to the improved catalytic activity of this supported catalyst.
基金supported by the National Specific-Purpose Scientific and Technical Program of Ukraine "Nanotechnology and Nanomaterials" (No.0110U005685)the Program of National Academy of Sciences of Ukraine "Fundamental Problems of Nanos-tructure Systems, Nanomaterials, Nanotechnologies" (No.KPKV 6541030)
摘要The present article studies the effect of CeO2 and A1203 on the activity of Pd/Co304/cordierite catalyst in conversion of NO, CO, CnHm. The catalysts were characterized by temperature programmed reduction with hydrogen, X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. It is shown that the effect of CeO2 on the properties of Pd/C03 O4/cordierite catalyst depends on preparation method. The catalyst obtained by co-deposition of cerium and cobalt oxides has higher activity in CO oxidation (CO + 02 and CO + NO) and total hexane oxidation (C6H14 + 02). Such phenomenon is probably caused by more than stoichiometric amount of formed oxygen vacancies, an increase in both mobility of surface oxygen and dispersity of components in the catalytic composition. It is demonstrated that CeO2 addition promotes the SO2 resistance of Pd/C03 O4/cordierite. The second support decreases the activity of Pd/Co3Oa/cordierite catalyst in the reactions of CO and C6H14 with oxygen because of COA1204 formation.
基金supported by National Natural Science Foundation of China(21776047,21203028)
摘要The Co/CeO2 catalysts promoted with Ba or K were prepared to study the effect of promoter on the catalytic performance of ammonia synthesis. The results show that the presence of Ba or K promoter changes the properties of CeO2-supported Co catalysts including the surface area, the crystallite size and the morphology of CeO2, the reduction degree of cobalt species and the adsorption performance of hydrogen and nitrogen. As a consequence, the samples promoted with an appropriate amount of Ba show higher ammonia synthesis rates, while the catalysts with high Ba loading or K promoter all exhibit low catalytic activities.
基金Project supported by the National key research and development program(2016YFC0204901)the National Natural Science Foundation of China(21576207)+1 种基金the Introduction Of Talent and Technology Cooperation Plan Of Tianjin(14RCGFGX00849)GM Global Research&Development(GAC 1539)
摘要This study was focused on the influence of active oxygen on the performance of Pt/CeO2 catalysts for CO oxidation. A series of CeO2 supports with different contents of active oxygen were obtained by adding surfactant at different synthesis steps. 0.25 wt% Pt was loaded on these CeO2 supports by incipientwetness impregnation methods. The catalysts were characterized by N2 adsorption, X-ray diffraction(XRD), high-resolution transmission electron microscopy(HRTEM), H2 temperature-programmed reduction(H2-TPR), dynamic oxygen storage capacity(DOSC) and in-situ DRIFTS technologies. For S-f supports, the surfactant was added into the solution before spray-drying in the synthesis process, which facilitates more active oxygen formation on the surface of CeO2. After loading Pt, the more active oxygen on CeO2 contributes to dispersing Pt species and enhancing the CO oxidation activity. As for the aged samples,Pt-R-h shows the highest activity above 190 ℃ because of the presence of more partly oxidized Pt^(δ+) species. Thus the activity is also influenced by the states of Pt and the Pt^(δ+) species may contribute to the high activity at elevated temperature.
基金supported by the National Natural Science Foundation of China (NO. 20976013, 21006057)
摘要CeO2-promoted Ni/Al2O3-ZrO2 (Ni/Al2O3-ZrO2-CeO2) catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared spectroscopy (IR), thermal gravimetric analysis (TGA), microscopic analysis, X-ray diffraction (XRD) and temperature-programmed reduction (TPR). The catalytic performance for CO2 reforming of methane to synthesis gas was investigated in a continuous-flow micro-reactor under atmospheric pressure. TGA, IR, XRD and microscopic analysis show that the catalysts prepared by the direct sol-gel process consist of Ni particles with a nanostructure of around 5 nm and an amorphous-phase composite oxide support. There exists a chemical interaction between metallic Ni particles and supports, which makes metallic Ni well dispersed, highly active and stable. The addition of CeO2 effectively improves the dispersion and the stability of Ni particles of the prepared catalysts, and enhances the adsorption of CO2 on the surface of catalysts. The catalytic tests for methane reforming with CO2 to synthesis gas show that the Ni/Al2O3-ZrO2-CeO2 catalysts show excellent activity and stability compared with the Ni/Al2O3 catalyst. The excellent catalytic activity and stability of the Ni/Al2O3-ZrO2-CeO2 are attributed to the highly, uniformly and stably dispersed small metallic Ni particles, the high reducibility of the Ni oxides and the interaction between metallic Ni particles and the composite oxide supports.