A rational design of Cu distribution is crucial for achieving optimal magnetic properties in Sm2Co17-type magnets.In this study,nanostructured PrO2 powders were employed to induce Cu redistribution at grain b...A rational design of Cu distribution is crucial for achieving optimal magnetic properties in Sm2Co17-type magnets.In this study,nanostructured PrO2 powders were employed to induce Cu redistribution at grain boundaries while preserving the cellular microstructure.The corresponding coercivity(Hcj),remanence(Br),and maximum energy product((BH)max) were significantly enhanced in the 1 wt% PrO2-doped magnet,with improvements of 4.36 kOe,0.22 kGs and 1.1 MGOe,respectively.These results surpass those of most rare-earth-oxide-doped Sm2Co17-type magnets reported to date.Microstructure characterization and micromagnetic simulations confirm that the coarse Cu-rich phase induced by PrO2 doping enhances the pinning strength at grain boundaries,thereby contributing to the observed coercivity enhancement.The(Sm1-xPrx)2Co17 phase exhibits a higher substitution energy barrier at Co sites,which promotes Cu migration toward grain boundaries.Meanwhile,the(Sm1-xPrx)2Co17phase also slightly improves the remanence in the 1 wt% PrO2-doped magnet due to its higher saturation magnetization(Ms).However,excessive PrO2 doping(2 wt%),while further increasing coercivity by 6.45 kOe,adversely affects squareness and remanence.This study demonstrates a viable strategy for fabricating high-performance Sm2Co17-type permanent magnets while enabling efficient utilization of rare-earth Pr oxides.展开更多
The study of nanocrystalline SnO2 (n-SnO2) and SiO2-doped SnO2 (n-Si-SnO2) samples pre-pared by the sol-gel process showed that SiO2 doping can effectively restrained the growth of nanocrystalline SnO2 grains, thus im...The study of nanocrystalline SnO2 (n-SnO2) and SiO2-doped SnO2 (n-Si-SnO2) samples pre-pared by the sol-gel process showed that SiO2 doping can effectively restrained the growth of nanocrystalline SnO2 grains, thus improving thermal stability of the materials.展开更多
Propylene,a readily accessible and economically viable light olefin,has garnered substantial interest for its potential conversion into valuable higher olefins through oligomerization processes.The distribution of pro...Propylene,a readily accessible and economically viable light olefin,has garnered substantial interest for its potential conversion into valuable higher olefins through oligomerization processes.The distribution of products is profoundly influenced by the catalyst structure.In this study,Fe2O3-doped NiSO4/Al2O3 catalysts have been meticulously developed to facilitate the selective trimerization of propylene under mild conditions.Significantly,the 0.25Fe2O3-NiSO4/Al2O3 catalyst demonstrates an enhanced reaction rate(48.5 mmolC3/(gcat.·h)),alongside a high yield of C9(~32.2%),significantly surpassing the performance of the NiSO4/Al2O3 catalyst(C9:~24.1%).The incorporation of Fe2O3 modifies the migration process of sulfate ions,altering the Lewis acidity of the electron-deficient Ni and Fe sites on the catalyst and resulting a shift in product distribution from a Schulz-Flory distribution to a Poisson distribution.This shift is primarily ascribed to the heightened energy barrier for theβ-H elimination reaction in the C6 alkyl intermediates on the doped catalyst,further promoting polymerization to yield a greater quantity of Type II C9.Furthermore,the validation of the Cossee-Arlman mechanism within the reaction pathway has been confirmed.It is noteworthy that the 0.25Fe2O3-NiSO4/Al2O3 catalyst exhibits remarkable stability exceeding 80 h in the selective trimerization of propylene.These research findings significantly enhance our understanding of the mechanisms underlying olefin oligomerization reactions and provide invaluable insights for the development of more effective catalysts.展开更多
Cu^2+-doped nanostructured TiO2-coated SiO2(TiO2/SiO2)particles were prepared by the layer-by-layer assembly technique and their photocatalytic property was studied.TiO2 colloids were synthesized by the sol-gel method...Cu^2+-doped nanostructured TiO2-coated SiO2(TiO2/SiO2)particles were prepared by the layer-by-layer assembly technique and their photocatalytic property was studied.TiO2 colloids were synthesized by the sol-gel method using TiOSO4 as a precursor.The experimental results showed that TiO2 nanopowders on the surface of SiO2 particles were well distributed and compact.The amount of TiO2 increased with the increase in coating layers.The shell structure appeared to be composed of anatase titania nanocrystals at 550℃.The 2-layer coated TiO2 particles on the surface showed a higher degradation rate compared with all the different-layer samples.The photocatalytic activity of Cu^2+-doped TiO2/SiO2 was higher than that ofundoped TiO2/SiO2.The optimum dopant content was about 0.10wt%.展开更多
Cerium-doped SiO2/TiO2 nanostructured fibers were fabricated by electrospinning technology. The prepared fibers were characterized by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray dif...Cerium-doped SiO2/TiO2 nanostructured fibers were fabricated by electrospinning technology. The prepared fibers were characterized by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Using the fibers as catalysts, photoeatalytic degradation of Methylene Blue (MB) aqueous solution was carded out under simulated sunlight. The 0.2% Ce doping proved to be the optimal concentration for the doping of TiO2/SiO2, compared to other Ce-doped molar concentrations. The 0.2% Ce-doped SiOdTiO2 fibers exhibited higher photocatalytic activity than industrial Degussa P25 and the samples doped with only Ce or SIO2. The reasons for improving the photocatalytic activity were also discussed. Several operational parameters were studied, which showed that the photocatalytic efficiency of MB was influenced by parameters such as the initial dye concentration, the initial pH, inorganic anions, and so on. In addition, the influences of an electron acceptor and a radical scavenger suggested that OH was the dominant photooxidant during the photocatalytic process. The reuse evaluation of the fibers indicated that their photocatalytic activity had good stability.展开更多
Y2O3-doped Mo secondary emitters were prepared by liquid-liquid doping and solid-solid doping,respectively.The back-scattered scanning observation result indicates that the emitter prepared by liquid-liquid doping has...Y2O3-doped Mo secondary emitters were prepared by liquid-liquid doping and solid-solid doping,respectively.The back-scattered scanning observation result indicates that the emitter prepared by liquid-liquid doping has fine microstructure whereas that prepared by solid-solid doping has large grain size.Y2O3-doped Mo emitter with small grain size prepared by liquid-liquid doping exhibits high emission property,i.e.,the secondary electron yield can get to 5.24,about 1.7 times that prepared by solid-solid doping.Moreover,Y2O3-doped Mo emitter exhibits the best emission performance among La2O3-doped Mo,Y2O3-doped Mo,Gd2O3-doped Mo and Ce2O3-doped Mo emitters due to the largest penetration depth of primary electrons and escape depth of secondary electrons in this emitter.The secondary emission of the emitter with small grain size can be explained by reflection emission model and transmission emission model,whereas only transmission emission exists in the emitter with large grain size.展开更多
A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3+-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence...A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3+-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence was attributed to ^5D3→^7F5, ^5D3→^7F4, ^5D3→^7F3, ^5D4→^7F6, ^5D4→^7F5, ^5D4→^7F4, and ^5D4→^7F3 transitions of Tb^3+. The relationship between upconversion luminescence intensity and the pump power indicated that a three-photon simultaneous absorption process was dominant in this upconversion luminescence. The intense red, green, and blue upconversion luminescence of Tb^3+-doped CaO-Al2O3-SiO2 glass may be potentially useful in developing three-dimensional display applications.展开更多
We report the structural and photoluminescence(PL) properties of Nd3+-doped Y2O3-SiO2 powders(Y2O3-SiO2:Nd3+) as functions of annealing temperature and Nd3+ ion doping concentration.Y2O_(...We report the structural and photoluminescence(PL) properties of Nd3+-doped Y2O3-SiO2 powders(Y2O3-SiO2:Nd3+) as functions of annealing temperature and Nd3+ ion doping concentration.Y2O3-SiO2:Nd3+powders were prepared using the high-energy ball-milling(HEBM) method,and their structural and PL properties were investigated using X-ray diffraction(XRD),Fourier transform infrared(FTIR) spectroscopy,and PL spectroscopy.The XRD results reveal a cubic phase without impurities,and the peak broadening decreases with an increase in annealing temperature due to the increase in the crystallite size.The PL emission intensity increases with an increase in annealing temperature.The highest PL emission intensity is observed for the 300-min milled mixture annealed at 1000℃ for 1 h with a Nd3+ concentration of 1 mol%.The PL peaks excited by 800 nm radiation were detected,centered at 1080 nm(4F3/2→4I11/2) and 1350 nm(4F3/2→4I13/2).展开更多
Al-doped and B, Al-codoped silica xerogel was fabricated by sol-gel process. The influence of B ions and annealing temperature on luminescent properties of phosphors were studied by using fluorescence spectrum, X-ray ...Al-doped and B, Al-codoped silica xerogel was fabricated by sol-gel process. The influence of B ions and annealing temperature on luminescent properties of phosphors were studied by using fluorescence spectrum, X-ray diffraction, DSC, TG/DTG analysis and IR spectrum. The heat treatment has a large effect on the luminescent properties. Under 248 nm excitation, the emission spectrum of samples heated shows characteristic emission peaks of Eu^3+ ions are, which are due to the transitions of ^5D0→^7FJ(J = 0, 1, 2, 3, 4) of Eu^3+ , respectively. The transition of ^5D0→^7F1 is split into two peaks.展开更多
Er3+-doped tellurite glass(TeO2-ZnO-Na2O) prepared using the conventional melt-quenching method is modified by introducing the SiO2,and its effects on the thermal stability of glass host and the 1.53 μm band spectros...Er3+-doped tellurite glass(TeO2-ZnO-Na2O) prepared using the conventional melt-quenching method is modified by introducing the SiO2,and its effects on the thermal stability of glass host and the 1.53 μm band spectroscopic properties of Er3+ are investigated by measuring the absorption spectra,1.53 μm band fluorescence spectra,Raman spectra and differential scanning calorimeter(DSC) curves.It is found that for Er3+-doped tellurite glass,besides improving its thermal stability,introducing SiO2 is helpful for the further improvement of the fluorescence full width at half maximum(FWHM) and bandwidth quality factor.The results indicate that the prepared Er3+-doped tellurite glass containing an appropriate amount of SiO2 has good prospect as a candidate of gain medium applied for 1.53 μm broadband amplifier.展开更多
Iron(Ⅲ)-doped nanostructure TiO2-coated SiO2 (TiO2/SiO2) particles were prepared using the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized employing...Iron(Ⅲ)-doped nanostructure TiO2-coated SiO2 (TiO2/SiO2) particles were prepared using the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized employing the sol-gel method with TiChas a precursor. The samples were characterized by Fourier transform infrared spectroscopy (FTIR), SEM, EDS, XPS, and XRD. The experimental results show that TiO2 nanopowders on the surface of SiO2 particles are well distributed, the amount of TiO2 is increased with the adding of coating layers, the pure anatase-TiO2 coating layers are synthesized at 500℃, and the photocatalytic activity of Fe^3+-doped TiO2/SiO2 is higher than that of undoped TiO2/SiO2.展开更多
With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are hig...With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are highly desired,In this wo rk,rare earth Eu2+ ions were incorporated Wnto CsCu2I3 microcrystals by solidstate reaction,Under a single UV excitation,the as-synthesized samples exhibit two emissions:452 nm blue emission from the 5d→4f transition of Eu2+and 582 nm yellow emission from self-trapped exciton e mission of CsCu2I3.The photoluminescence quantum yield reaches to 50%,The dual-band emission of Eu2+-doped CsCu2I3 shows different temperature responses in the range of 260-360 K.Based on fluorescence intensity ratio technology,the maximum absolute sensitivity and re Iative sensitivity are 0.091 K-1(at 360 K) and 2.60%/K(at 260 K),respectively.These results suggest that Eu2+-doped GsCu2I3 could be a good candidate for highly sensitive optical thermometer.展开更多
The Sm^(3+)-doped SrO-Al2O3-SiO2(SAS) glass-ceramics with excellent luminescence properties were prepared by batch melting and heat treatment. The crystallization behavior and luminescent properties of the glass-...The Sm^(3+)-doped SrO-Al2O3-SiO2(SAS) glass-ceramics with excellent luminescence properties were prepared by batch melting and heat treatment. The crystallization behavior and luminescent properties of the glass-ceramics were investigated by DTA, XRD, SEM and luminescence spectroscopy. The results indicate that the crystal phase precipitated in this system is monocelsian(SrAl2Si2O) and with the increase of nucleation/crystallization temperature, the crystallite increases from 66 % to 79 %. The Sm(3+)-doped SAS glass-ceramics emit green, orange and red lights centered at 565, 605, 650 and 715 nm under the excitation of 475 nm blue light which can be assigned to the 4 G5/2→6 Hj/2(j=5, 7, 9, 11) transitions ofSm^(3+), respectively. Besides, by increasing the crystallization temperature or the concentration ofSm^(3+), the emission lights of the samples located at 565, 605 and 650 nm are intensified significantly. The present results demonstrate that theSm^(3+)-doped SAS glassceramics are promising luminescence materials for white LED devices by fine controlling and combining of these three green, orange and red lights in appropriate proportion.展开更多
基金financially supported by the fifth batch of major research and development projects in Panxi Experimental Zone(Grant No.2021dfky005).
摘要A rational design of Cu distribution is crucial for achieving optimal magnetic properties in Sm2Co17-type magnets.In this study,nanostructured PrO2 powders were employed to induce Cu redistribution at grain boundaries while preserving the cellular microstructure.The corresponding coercivity(Hcj),remanence(Br),and maximum energy product((BH)max) were significantly enhanced in the 1 wt% PrO2-doped magnet,with improvements of 4.36 kOe,0.22 kGs and 1.1 MGOe,respectively.These results surpass those of most rare-earth-oxide-doped Sm2Co17-type magnets reported to date.Microstructure characterization and micromagnetic simulations confirm that the coarse Cu-rich phase induced by PrO2 doping enhances the pinning strength at grain boundaries,thereby contributing to the observed coercivity enhancement.The(Sm1-xPrx)2Co17 phase exhibits a higher substitution energy barrier at Co sites,which promotes Cu migration toward grain boundaries.Meanwhile,the(Sm1-xPrx)2Co17phase also slightly improves the remanence in the 1 wt% PrO2-doped magnet due to its higher saturation magnetization(Ms).However,excessive PrO2 doping(2 wt%),while further increasing coercivity by 6.45 kOe,adversely affects squareness and remanence.This study demonstrates a viable strategy for fabricating high-performance Sm2Co17-type permanent magnets while enabling efficient utilization of rare-earth Pr oxides.
摘要The study of nanocrystalline SnO2 (n-SnO2) and SiO2-doped SnO2 (n-Si-SnO2) samples pre-pared by the sol-gel process showed that SiO2 doping can effectively restrained the growth of nanocrystalline SnO2 grains, thus improving thermal stability of the materials.
摘要Propylene,a readily accessible and economically viable light olefin,has garnered substantial interest for its potential conversion into valuable higher olefins through oligomerization processes.The distribution of products is profoundly influenced by the catalyst structure.In this study,Fe2O3-doped NiSO4/Al2O3 catalysts have been meticulously developed to facilitate the selective trimerization of propylene under mild conditions.Significantly,the 0.25Fe2O3-NiSO4/Al2O3 catalyst demonstrates an enhanced reaction rate(48.5 mmolC3/(gcat.·h)),alongside a high yield of C9(~32.2%),significantly surpassing the performance of the NiSO4/Al2O3 catalyst(C9:~24.1%).The incorporation of Fe2O3 modifies the migration process of sulfate ions,altering the Lewis acidity of the electron-deficient Ni and Fe sites on the catalyst and resulting a shift in product distribution from a Schulz-Flory distribution to a Poisson distribution.This shift is primarily ascribed to the heightened energy barrier for theβ-H elimination reaction in the C6 alkyl intermediates on the doped catalyst,further promoting polymerization to yield a greater quantity of Type II C9.Furthermore,the validation of the Cossee-Arlman mechanism within the reaction pathway has been confirmed.It is noteworthy that the 0.25Fe2O3-NiSO4/Al2O3 catalyst exhibits remarkable stability exceeding 80 h in the selective trimerization of propylene.These research findings significantly enhance our understanding of the mechanisms underlying olefin oligomerization reactions and provide invaluable insights for the development of more effective catalysts.
基金the Department of Education of Hebei Province,China(No.2005362)
摘要Cu^2+-doped nanostructured TiO2-coated SiO2(TiO2/SiO2)particles were prepared by the layer-by-layer assembly technique and their photocatalytic property was studied.TiO2 colloids were synthesized by the sol-gel method using TiOSO4 as a precursor.The experimental results showed that TiO2 nanopowders on the surface of SiO2 particles were well distributed and compact.The amount of TiO2 increased with the increase in coating layers.The shell structure appeared to be composed of anatase titania nanocrystals at 550℃.The 2-layer coated TiO2 particles on the surface showed a higher degradation rate compared with all the different-layer samples.The photocatalytic activity of Cu^2+-doped TiO2/SiO2 was higher than that ofundoped TiO2/SiO2.The optimum dopant content was about 0.10wt%.
基金supported by the National Natural Science Foundation of China (No. 20907022,21003094)the Doctoral Program of Higher Education of China(No. 200800551003,20100032120066)the Special Projects of Environmental Protection (No. 2009ZX07526,2009ZX07208,200909101,2009GJA10021)
摘要Cerium-doped SiO2/TiO2 nanostructured fibers were fabricated by electrospinning technology. The prepared fibers were characterized by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Using the fibers as catalysts, photoeatalytic degradation of Methylene Blue (MB) aqueous solution was carded out under simulated sunlight. The 0.2% Ce doping proved to be the optimal concentration for the doping of TiO2/SiO2, compared to other Ce-doped molar concentrations. The 0.2% Ce-doped SiOdTiO2 fibers exhibited higher photocatalytic activity than industrial Degussa P25 and the samples doped with only Ce or SIO2. The reasons for improving the photocatalytic activity were also discussed. Several operational parameters were studied, which showed that the photocatalytic efficiency of MB was influenced by parameters such as the initial dye concentration, the initial pH, inorganic anions, and so on. In addition, the influences of an electron acceptor and a radical scavenger suggested that OH was the dominant photooxidant during the photocatalytic process. The reuse evaluation of the fibers indicated that their photocatalytic activity had good stability.
基金Projects(2006AA03Z524,2008AA031001)supported by the National Hi-tech Research and Development Program of ChinaProject(50801001)supported by the National Natural Foundation of China
摘要Y2O3-doped Mo secondary emitters were prepared by liquid-liquid doping and solid-solid doping,respectively.The back-scattered scanning observation result indicates that the emitter prepared by liquid-liquid doping has fine microstructure whereas that prepared by solid-solid doping has large grain size.Y2O3-doped Mo emitter with small grain size prepared by liquid-liquid doping exhibits high emission property,i.e.,the secondary electron yield can get to 5.24,about 1.7 times that prepared by solid-solid doping.Moreover,Y2O3-doped Mo emitter exhibits the best emission performance among La2O3-doped Mo,Y2O3-doped Mo,Gd2O3-doped Mo and Ce2O3-doped Mo emitters due to the largest penetration depth of primary electrons and escape depth of secondary electrons in this emitter.The secondary emission of the emitter with small grain size can be explained by reflection emission model and transmission emission model,whereas only transmission emission exists in the emitter with large grain size.
基金supported by the Education Department of Zhejiang Province (20050359)
摘要A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3+-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence was attributed to ^5D3→^7F5, ^5D3→^7F4, ^5D3→^7F3, ^5D4→^7F6, ^5D4→^7F5, ^5D4→^7F4, and ^5D4→^7F3 transitions of Tb^3+. The relationship between upconversion luminescence intensity and the pump power indicated that a three-photon simultaneous absorption process was dominant in this upconversion luminescence. The intense red, green, and blue upconversion luminescence of Tb^3+-doped CaO-Al2O3-SiO2 glass may be potentially useful in developing three-dimensional display applications.
基金The authors would like to thank the financial support by a 2019 research fund from Chosun University.
摘要We report the structural and photoluminescence(PL) properties of Nd3+-doped Y2O3-SiO2 powders(Y2O3-SiO2:Nd3+) as functions of annealing temperature and Nd3+ ion doping concentration.Y2O3-SiO2:Nd3+powders were prepared using the high-energy ball-milling(HEBM) method,and their structural and PL properties were investigated using X-ray diffraction(XRD),Fourier transform infrared(FTIR) spectroscopy,and PL spectroscopy.The XRD results reveal a cubic phase without impurities,and the peak broadening decreases with an increase in annealing temperature due to the increase in the crystallite size.The PL emission intensity increases with an increase in annealing temperature.The highest PL emission intensity is observed for the 300-min milled mixture annealed at 1000℃ for 1 h with a Nd3+ concentration of 1 mol%.The PL peaks excited by 800 nm radiation were detected,centered at 1080 nm(4F3/2→4I11/2) and 1350 nm(4F3/2→4I13/2).
摘要Al-doped and B, Al-codoped silica xerogel was fabricated by sol-gel process. The influence of B ions and annealing temperature on luminescent properties of phosphors were studied by using fluorescence spectrum, X-ray diffraction, DSC, TG/DTG analysis and IR spectrum. The heat treatment has a large effect on the luminescent properties. Under 248 nm excitation, the emission spectrum of samples heated shows characteristic emission peaks of Eu^3+ ions are, which are due to the transitions of ^5D0→^7FJ(J = 0, 1, 2, 3, 4) of Eu^3+ , respectively. The transition of ^5D0→^7F1 is split into two peaks.
基金supported by the National Natural Science Foundation of China(No.61178063)the Graduate Innovative Scientific Research Project of Zhejiang Province(No.YK2010048)+1 种基金the Scientific Research Foundation of Graduate School of Ningbo University(No.G13035)the K.C.Wong Magna Fund and Hu Lan Outstanding Doctoral Fund in Ningbo University
摘要Er3+-doped tellurite glass(TeO2-ZnO-Na2O) prepared using the conventional melt-quenching method is modified by introducing the SiO2,and its effects on the thermal stability of glass host and the 1.53 μm band spectroscopic properties of Er3+ are investigated by measuring the absorption spectra,1.53 μm band fluorescence spectra,Raman spectra and differential scanning calorimeter(DSC) curves.It is found that for Er3+-doped tellurite glass,besides improving its thermal stability,introducing SiO2 is helpful for the further improvement of the fluorescence full width at half maximum(FWHM) and bandwidth quality factor.The results indicate that the prepared Er3+-doped tellurite glass containing an appropriate amount of SiO2 has good prospect as a candidate of gain medium applied for 1.53 μm broadband amplifier.
基金the Nationnal Natural Science Foundation of China (No. 50342016).
摘要Iron(Ⅲ)-doped nanostructure TiO2-coated SiO2 (TiO2/SiO2) particles were prepared using the layer-by-layer assembly technique and their photocatalytic property was studied. TiO2 colloids were synthesized employing the sol-gel method with TiChas a precursor. The samples were characterized by Fourier transform infrared spectroscopy (FTIR), SEM, EDS, XPS, and XRD. The experimental results show that TiO2 nanopowders on the surface of SiO2 particles are well distributed, the amount of TiO2 is increased with the adding of coating layers, the pure anatase-TiO2 coating layers are synthesized at 500℃, and the photocatalytic activity of Fe^3+-doped TiO2/SiO2 is higher than that of undoped TiO2/SiO2.
基金supported by the National Natural Science Foundation of China (62205072)Natural Science Foundation of Guangxi(2022GXNSFBA035656)+1 种基金Science and Technology Agency of Guangxi (GuikeAD20159054)Education Department of Guangxi (2019KY0004)。
摘要With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are highly desired,In this wo rk,rare earth Eu2+ ions were incorporated Wnto CsCu2I3 microcrystals by solidstate reaction,Under a single UV excitation,the as-synthesized samples exhibit two emissions:452 nm blue emission from the 5d→4f transition of Eu2+and 582 nm yellow emission from self-trapped exciton e mission of CsCu2I3.The photoluminescence quantum yield reaches to 50%,The dual-band emission of Eu2+-doped CsCu2I3 shows different temperature responses in the range of 260-360 K.Based on fluorescence intensity ratio technology,the maximum absolute sensitivity and re Iative sensitivity are 0.091 K-1(at 360 K) and 2.60%/K(at 260 K),respectively.These results suggest that Eu2+-doped GsCu2I3 could be a good candidate for highly sensitive optical thermometer.
基金Funded by the National Natural Science Foundation of China(No.5137217)Hubei Province Foreign Science and Technology Project(No.2016AHB027)Science and Technology Planning Project of Hubei Province(No.2014BAA136)
摘要The Sm^(3+)-doped SrO-Al2O3-SiO2(SAS) glass-ceramics with excellent luminescence properties were prepared by batch melting and heat treatment. The crystallization behavior and luminescent properties of the glass-ceramics were investigated by DTA, XRD, SEM and luminescence spectroscopy. The results indicate that the crystal phase precipitated in this system is monocelsian(SrAl2Si2O) and with the increase of nucleation/crystallization temperature, the crystallite increases from 66 % to 79 %. The Sm(3+)-doped SAS glass-ceramics emit green, orange and red lights centered at 565, 605, 650 and 715 nm under the excitation of 475 nm blue light which can be assigned to the 4 G5/2→6 Hj/2(j=5, 7, 9, 11) transitions ofSm^(3+), respectively. Besides, by increasing the crystallization temperature or the concentration ofSm^(3+), the emission lights of the samples located at 565, 605 and 650 nm are intensified significantly. The present results demonstrate that theSm^(3+)-doped SAS glassceramics are promising luminescence materials for white LED devices by fine controlling and combining of these three green, orange and red lights in appropriate proportion.